Irvine 46 (Full Version)

All Forums >> [Glow Engines, Gas Engines, Fuel & Mfg Support Forums] >> Glow Engines



Message

Bratpak -> Irvine 46 (5/4/2008 8:51:27 PM)

I just aquired an Irvine 46 and have read that these engines do not need much nitro content.
Would 10% nitro be too much or can I run it with a 0% nitro fuel(meaning mixing my own 0% fuel)???

Mark



N1EDM -> RE: Irvine 46 (5/5/2008 1:32:18 AM)

I used to run my Irvine on 10% with no problems...

As for mixing your own fuel, perhaps your LHS has a jug of FAI Fuel (no nitro) hanging around, or can get it with his next order... save you the trouble of mixing your own

Bob



PoormansACE -> RE: Irvine 46 (5/5/2008 2:00:18 PM)

I had an irvine too. good engine 10-15 percent with an os #8 plug is best. mine never was a powerhouse, but it had the best idle I've ever seen in a 2 stroke.



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.078125