|
Broken Blade -> RE: wall adapter to charge nickle batteries (5/9/2008 10:55:57 PM)
|
Hi, I think you could use a different charger with the same specs (input: 120vac, 60 hz, 60mA. Output: 12vdc, 300mA) but to get one with the same fitting may be tough. For another solution, I bought a 7.4V Lipo 800mAh from Xheli for $14.95. It lasts longer and lighter and more power so you can fly easier. Xheli says you can't use them on the Honeybee FP but you can. Their tech support sucks. I already had a charger that came with my Belt CP so I didn't have to buy that. I've lately seen good deals on the same type battery on Ebay. I haven't had problems with Xheli yet except for answering questions because like you said, they never answer their phones or they give wrong answers, but I try to stay away from them as they are constanly out of parts. good luck.
|
|
|
|