|
Dale Gribble -> RE: JR XS3PRO Trouble. Please help me. (5/5/2008 9:22:08 PM)
|
So, set the manual dial on the receiver to the channel that you want to use. Next, hold down the 'scroll' and 'channel' buttons on the transmitter, then turn the transmitter on. If you hit scroll one time, it will show the channel the Tx is on. Then you just hit increase or decrease to get the tx to the channel you dialed the receiver in at. Once I dial in the channel, I usually just turn the radio off and back on (there is a way to get out of the setup menu, but I just turn the tx off/on to make it easy). The radio will now be set at the new channel and the two should talk. Is that what you are doing?
|
|
|
|