|
Cazenave26 -> New Owner of E620 - Need Recommendation on Parts (5/9/2008 4:19:30 AM)
|
I now the owner of an E620 Tiger Raptor. After getting the heli-bug and fooling with a cheap FP, I was wavering on a T-Rex 500 and 600, but found this for a fairly good deal. I've been accumulating some of the electronics, but need some input on motor, BEC, ESC, etc and whether the electronics I already have are workable with this size heli.
Expected Use
I'm not going to be flying this 3D. What I'm interested in long term is aerial photography/videography and scale flight. I've read where the E620 flies heavier than the 600, so this should actually help me with the AP.
What Other Equipment I've Accumulated
- Futaba 7C 2.4 GHZ Transmitter with R617FS receiver
- (4) Futaba S3152 Servos
- Futaba GY401 Gyro with S9253 Servo
Recommendations/Comments?
- Are the S3152 servos going to be workable with a heli this big considering the type flying I'll be doing?
- Is the GY401 going to be acceptable?
- If I upgrade the gyro, is the 9253 servo still going to be usable?
- Motor , BEC, ESC, etc recommendations?
- I figure the battery needs to be a 10s considering I'm planning to add weight later on for a camera mount. [/ul}
Thanks
|
|
|
|
