AeroFly Professional Deluxe (Full Version)

All Forums >> [RC Airplanes] >> RC Flight Simulator Software >> Ikarus AeroFly Pro and Aerofly Pro Deluxe



Message


kwarner -> AeroFly Professional Deluxe (5/9/2008 1:13:59 PM)




There is a wide range of turbine powered helicopters as well as a couple turboprop machines as well in AeroFly Professional Deluxe. Is there a way to source / import jet turbine/ turboshaft / turboprop ".wav" files for use with the models?

The reciprocating engine sound that is used for the turbine models does not compliment the high quality of the rest of the simulation.



Konrad





rajul -> RE: AeroFly Professional Deluxe (5/13/2008 1:38:00 AM)

You can exchange the sound files of any particular model to that of another which you prefer. Go into the AFPD aircraft directory C:\Program Files\IPACS\AeroFly Professional Deluxe\aircraft Here you will find all the aircraft folders. The .tmd file is where all of the sound files are called.

Here's how you do it:

1. Open the .tmd file in the particular aircraft folder with notepad and use the "Find" option (under the "Edit" tab) to find the word "sound". There it gives you the file names that are used. In this case it's like "Extra 330-xxxx" for planes, and "gheli1" for helicopters (skip the "blade1" sound file)

2. Look in your Sound folder C:\Program Files\IPACS\AeroFly Professional Deluxe\sound for the names of alternative sound files to use.

3. Replace the "Extra 330-xxxx" information (there are typically three entries for planes and one entry for helicopters) with the name of a sound file you want in the sound folder.

4. Go to "File" and click "Save" and you're all set.




kuhloec1 -> RE: AeroFly Professional Deluxe (7/8/2008 8:14:33 PM)

We are trying to install the AeroFly Professional Deluxe software and continue to get an error message. The message says:
"CRC error: The File C:\ProgramFiles\IPACS\AeroFlyProfessionalDeluxe\scenery\fuerteventura\fuerteventura43c.tmt doesn't match the setup's .cab file.
The medium from which you are running the setup may be corrupted; contact your software vendor."
We have contacted the vendor from whom we purchased the software and they referred us to this site. Can you help?[:o]




rajul -> RE: AeroFly Professional Deluxe (7/9/2008 12:02:03 AM)

kuhloec, pls start a new thread on your question. Thanks




Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.078125