|
Broken Blade -> Belt CP mainshaft removal question (5/9/2008 10:34:14 PM)
|
Hi,
This is the first time that I've needed to work on the Belt CP this extensive and I have to remove the mainshaft as it's slightly bent. I have the Swashplate, head, blades, top mainshaft retaining ring, etc removed and my question is, if I remove the lower little bolt below the gears, will the mainshaft pull out or do I have to take apart the frame. Just trying to get the job done the easiest way. Also what kind of lube should be used on the lubed parts. Thanks for any help.
|
|
|
|
