how much dissasembling to lock rear dif tt01D? (Full Version)

All Forums >> [RC Cars, Buggies, Trucks, Tanks and more] >> RC Drifting



Message

belfastdrifter -> how much dissasembling to lock rear dif tt01D? (5/11/2008 3:57:27 AM)

I've seen the faqs and 1 or 2 guides which dont give out much info on what to do (just dissemble in reverse from instructions) Im a bit of a noob & this is my first RC and obviously I dont wanna balls up my machine. [:D]



Nasher -> RE: how much dissasembling to lock rear dif tt01D? (5/11/2008 3:38:04 PM)

I don't have pics but i will explain the best i can. remove the 2 flathead screws and 3 self tappers from the rear that helps holds the 2 have together, next take out the top 2, slide the halves appart, pull out the diff, unscrew the 3/4(I can't remember how many i have) pull the case apart then get clay to start, reasemble as par to the instructions take it for a test and if you like the way it is, leave it and if you don't follow the steps above and remove it, then maybe fill it with some heavy diff grease so it can be a differential still but have the spool(locked diff) properties



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.140625