OFNA Picco .21B 3-Port Nitro Engine (Full Version)

All Forums >> [RC Cars, Buggies, Trucks, Tanks and more] >> [RC Car Engines] >> Car Nitro & Gas Engines

Message

---

meno222 -> OFNA Picco .21B 3-Port Nitro Engine (5/11/2008 5:45:46 PM) hello fellas,iam looking for a good engine on a budget.to put on my buggy,this will be my first 1/8 scale buggy.so yes iam a newbie.i saw this one engine OFNA Picco .21B 3-Port Nitro Engine on amain hobbies for 109.99 http://www.amainhobbies.com/product_info.php/cPath/1_23_31/products_id/12591 .i dont bash i just go to the track and will run the buggy.i have never raced but that is my goal to race.is this a good engine to start off with. or will i be wasting my money.the next cheapest engine i saw was the go tech. .21 sport but it needs a starter box. i would really apreddiate your advice . thanks manuel

---

cam3r0n -> RE: OFNA Picco .21B 3-Port Nitro Engine (5/14/2008 2:07:05 PM) Both are good. I have both Picco and Go engines and I really love the redline on my Picco, but the Go is an awsome block for the money. You might as well get the starter box as the pull start seems convinient at first, but I spent loads on oneway bearings and pull start cords. Plus you lose a small amount of power to the oneway bearing. It adds extra weight and extra maintenance. IMO a starter box is the way to go.

---

mogi -> RE: OFNA Picco .21B 3-Port Nitro Engine (5/14/2008 7:50:26 PM) i used to have one in a hyper7,it was a great motor for the money you wont be completely blown away by other motors.my mate had a rbws7 in his identical buggy and was no quicker at all until the gallon mark when his would walk away at the top end,picco was torquier though.

---

Page: [1] 1

SITE MAP!   : :   FORUM RULES © 2001 - 2007 24-7 RC, LLC, all rights reserved.

0.078125