|
HW50 -> RE: ST Model Easy Fly (5/24/2008 8:38:49 PM)
|
Yes, I own one. I like it very much and it's a good flyer.
It was cheap I know, so I accept having to perform one modification to the plane:
The control surfaces have thin plastic tubes with piano wires inside, between the surfaces and the servos. The rudder control tube has a 90 degree bend at the rear of the plane. This makes the control so stiff that the rudder does not return to zero position after being moved. To cure this I straightened the tube and let it follow an almost straight line to a lower point on the rudder where i put an ordinary control horn. The rudder works perfectly with this arrangement.
With this mod I would recommend this plane strongly.
Helge
Norway.
|
|
|
|
