Nitro Lancair 360 MK II tips (Full Version)

All Forums >> [RC Airplanes] >> Kit Building



Message

bowlingbrad -> Nitro Lancair 360 MK II tips (5/12/2008 1:43:08 AM)

I purchased this kit and, after some internet surfing, found that the .40 version had some issues. I could not find any info on this plane. Has anyone else built one of these? Do you have any tips? The instructions are sparse to say the least. I was wondering if there needs to be any reinforcement of the joints, hinges, firewall, etc.

http://www.nitroplanes.com/lancair120.html

Thanks in advance!



bowlingbrad -> RE: Nitro Lancair 360 MK II tips (5/12/2008 1:26:59 PM)

Oops!
This post should be in the ARF forum. Will an administrator please move this to the correct forum.

Sorry,
Brad
[sm=red_smile.gif]



bowlingbrad -> RE: Nitro Lancair 360 MK II tips (5/13/2008 12:55:03 PM)

Hey, now I'm getting nervous.... I can't be the first one to fly one of these things. I'm not that good of a pilot.

Anyone?



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.0625