RC Tools

RC Tools (Full Version)

All Forums >> [RC Cars, Buggies, Trucks, Tanks and more] >> Himoto Racing Support Forum

Message

DonnyNitro -> RC Tools (5/12/2008 2:31:14 AM)
Just thought we should start a post on what the fundamental tools are you should have in you RC toolbox. I do have a question...anyone know where you can get wrenches smaller that 5-6mm??

HimotoRacingUSA -> RE: RC Tools (5/12/2008 2:39:19 AM)
4 way wrench, decent set of allen wrenches

DonnyNitro -> RE: RC Tools (5/12/2008 2:40:54 AM)
quote: ORIGINAL: DonnyNitro Just thought we should start a post on what the fundamental tools are you should have in you RC toolbox. I do have a question...anyone know where you can get wrenches smaller that 5-6mm?? I mean really small crescent wrenches....2-5 mm.

need2drag -> RE: RC Tools (5/12/2008 2:48:41 AM)
Lets see, I would have to say good allen wrenches....many sizes...lol, flat head and phillips head screwdrivers, needle nose pliers, and of course locktight. he he he

Lawdawg203 -> RE: RC Tools (5/12/2008 5:44:51 AM)
Super glue and duct tape (could keep you running for a while longer).....

ranger4x4 -> RE: RC Tools (5/12/2008 7:04:29 AM)
don try looking at craftsman precision tools or snap on tools or mac tools. but you never know you should try canadian tire too they might have some too. the edit is to add my box contents lol. a large 4 way and small 4way. good ball end allen wrenches, flat and phillips mastercraft precision screwdrivers, fuel line, glow plugs, plenty of extra parts, needle nose pliers afo, and arr. and wd-40. and plenty of new batteries.

{GBI}Harryball -> RE: RC Tools (5/12/2008 4:13:18 PM)
quote: ORIGINAL: DonnyNitro Just thought we should start a post on what the fundamental tools are you should have in you RC toolbox. I do have a question...anyone know where you can get wrenches smaller that 5-6mm?? Get ignition wrenches, both SAE and Metric. They do the trick. [:)]

rclynx -> RE: RC Tools (5/12/2008 7:04:07 PM)
works for me [:D] and a good STAND

bkfamily1 -> RE: RC Tools (5/12/2008 9:51:09 PM)
try this for little wrenches - this set goes down to 4mm - they have some other stuff as well including wrenches down to 5/64" and nut drivers down to 3/32" and 2mm. https://www.micro-tools.com/store/item_detail.aspx?ItemCode=SCR-913-00

ranger4x4 -> RE: RC Tools (5/13/2008 12:38:57 AM)
i'll be ordering some wrenches from there real soon bk thx for the link.

bkfamily1 -> RE: RC Tools (5/13/2008 2:09:49 AM)
They have some pretty cool stuff on that site. Maybe for next month's contest, Eddie can offer this as a prize!

Redharris -> RE: RC Tools (5/13/2008 3:00:53 AM)
quote: ORIGINAL: DonnyNitro quote: ORIGINAL: DonnyNitro Just thought we should start a post on what the fundamental tools are you should have in you RC toolbox. I do have a question...anyone know where you can get wrenches smaller that 5-6mm?? I mean really small crescent wrenches....2-5 mm. Metric Ignition Wrench set from Craftsman. As small as 2.5mm....

Redharris -> RE: RC Tools (5/13/2008 3:54:23 AM)
Thought I would Post a Pic of my most Commonly Used Tools..... Except for the Red handled Snap-On Mini Expandable Pliers, everything is fairly inexpensive.... I use other tools, but These are my Primary friends...

rclynx -> RE: RC Tools (5/13/2008 12:58:34 PM)
What no BFH? Thats the #1 anger management tool [:D]

Cam_132 -> RE: RC Tools (5/13/2008 4:46:36 PM)
What are all of the allen screws? Inches, or Milimeaters?

coostv -> RE: RC Tools (5/13/2008 5:42:16 PM)
quote: ORIGINAL: Cam_132 What are all of the allen screws? Inches, or Milimeaters? They are all metric. Chris

Redharris -> RE: RC Tools (5/16/2008 7:16:13 AM)
Yeah....all Metric.... Everything I have worked on so far (Himoto, Losi, Redcat) has been Metric. Sigh.....except for that OLD Associated RC10, that my Buddy got from some Chick at a Garage Sale....lol. rclynx..... Considering all the Solid Objects ( Walls, cough, Curbs, sigh....) I encounter, I Kinda,Sorta dont Need a BFH. [:D]

rclynx -> RE: RC Tools (5/16/2008 12:56:59 PM)
LOL you need it more then, to straighten it out [:@]

Page: [1]

SITE MAP! : : FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

0.375