Staudacher 300-GS (Full Version)

All Forums >> [RC Airplanes] >> Scratch Building, Aircraft Design, 3D/CAD



Message

ALW Phantom -> Staudacher 300-GS (5/12/2008 8:36:27 PM)

Hello everyone, I just tried to order from RC Store the plans for the 300-GS that was shown in MAN 2007 and was told they were out of stock and no longer carry it. Anyone out there know where else I may be able to get a set of these plans. I have been checking that web site that starts with the letter E*** and no one seems to have a set for sale.

ALW



petronio -> RE: Staudacher 300-GS (5/13/2008 12:34:59 PM)

Check this out:

http://www.modellflugseiten.de/Bauplan/Kunstflug/Staudacher/

byee



ALW Phantom -> RE: Staudacher 300-GS (5/13/2008 9:28:59 PM)

Thanks for the link, I checked it out and it looks like a nice size. All I have to do now is find what scale its in because there are no measurements on it, and get it printed. Thanks again ....

ALW



petronio -> RE: Staudacher 300-GS (5/14/2008 8:51:51 AM)

On the little square in the right-hand side, it says: 1/4 scale, 75'' wingspan, 1.08 - 1.50 2 stroke, 1.2-1.6 4-stroke, 38-41cc gas ;). Good luck!



ALW Phantom -> RE: Staudacher 300-GS (5/14/2008 6:24:04 PM)

Yes I do see the 1/4 scale and 75"ws but no where on there is a size that I can measure to be sure it comes out the right size when I print it. Anyone have any ideas on this ?????



mmattockx -> RE: Staudacher 300-GS (5/14/2008 7:06:27 PM)


quote:

ORIGINAL: ALW Phantom

Yes I do see the 1/4 scale and 75"ws but no where on there is a size that I can measure to be sure it comes out the right size when I print it. Anyone have any ideas on this ?????


Since it is a CAD format, measure the wingspan in the drawing, scale it to whatever size you want to build, then print it at 1:1.


Mark



ALW Phantom -> RE: Staudacher 300-GS (5/14/2008 7:29:02 PM)

Looks like I will have to learn a CAD program. I was kinda hoping to just take it somewhere and get it printed. Guess I have an excuse now to look into a new toy/tool for the computer ...

ALW



cam-flyer -> RE: Staudacher 300-GS (5/15/2008 12:00:26 AM)

I am looking for a cowl and getting ready to make a mold for one and noticed this thread. Let me know if I can help!

Charlotte Aircraft Modeling

[:D] CAM-Flyer



ALW Phantom -> RE: Staudacher 300-GS (5/15/2008 4:27:11 PM)

Cam I tried to PM you but it doesnt seem to be working. Can you PM me when you have some free time.

ALW



MasterAlex -> RE: Staudacher 300-GS (5/15/2008 6:03:00 PM)


quote:

ORIGINAL: ALW Phantom

Hello everyone, I just tried to order from RC Store the plans for the 300-GS that was shown in MAN 2007 and was told they were out of stock and no longer carry it. Anyone out there know where else I may be able to get a set of these plans. I have been checking that web site that starts with the letter E*** and no one seems to have a set for sale.

ALW

You might try contacting Gerry Yarrish over at MAN (he's their Sr. Technical Editor). I had trouble ordering that plan last year and he was of great assistance to me. He's active on their message boards or via PM over there (MAN Link)

Good Luck!

-MA



ALW Phantom -> RE: Staudacher 300-GS (5/15/2008 6:23:47 PM)

I tried to post on another message board hes on but it seems a bit messed up. I will try again to contact him through MAN. I am at the point where this is turning into pure determination to get a set of the plans HAHAHAHA

ALW



cam-flyer -> RE: Staudacher 300-GS (5/15/2008 7:13:53 PM)

ALW,

Here are colored Adobe PDFs I just created that you may be able to scale on a copy machine to get what you want.

CAM-Flyer



ALW Phantom -> RE: Staudacher 300-GS (5/15/2008 7:23:12 PM)

Thanks CAM !!!!! I will have to take them to a printshop.

ALW



MasterAlex -> RE: Staudacher 300-GS (5/23/2008 5:37:33 PM)


quote:

ORIGINAL: ALW Phantom

Thanks CAM !!!!! I will have to take them to a printshop.

ALW

Any luck getting these printed ALW? Just curious ...



ALW Phantom -> RE: Staudacher 300-GS (5/23/2008 6:40:23 PM)

I havent had a chance to get to a copy shop yet and I am hoping to after the holiday weekend. There is a Staples close but they can only print 24x48 sheets and the Kinkos is a few towns away. I will keep you posted.

ALW



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.1875