Hog bipe Dope Paint (Full Version)

All Forums >> [RC Airplanes] >> Questions and Answers



Message

BAlbertsman -> Hog bipe Dope Paint (5/13/2008 9:12:42 PM)

I am putting together a Hog Bipe and plan on using Koveral and Dope. I will be using the Brodak brand paint. Has anyone use this paint on the plastic head rest and wheel pants before? Will it hurt the plastic? Should the plastic pieces be primed with some thing other than the dope primer?

Bernie



chashint -> RE: Hog bipe Dope Paint (5/13/2008 10:39:40 PM)

I used the Randolph brand on mine and it did not soften the plastic at all.
I sanded it so the surface would not be slick. I did not use primer.



LesUyeda -> RE: Hog bipe Dope Paint (5/14/2008 3:15:04 PM)

My experience with dope and plastic is that it does not like to stick well. I use a non-sandable spray can automotive primer first. That sticks well enough so that you can tape and paint trim; and remove the tape without taking the dope with it.

Les



BAlbertsman -> RE: Hog bipe Dope Paint (5/14/2008 9:31:47 PM)

Thanks for the info guys.



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.078125