Yay, my Belt CP is here!  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       

All Forums >> RC Helicopters >> Electric RC Helis >> Esky Helicopters >> Yay, my Belt CP is here!
Page: [1]

Login
Message << Older Topic   Newer Topic >>
Yay, my Belt CP is here! - 5/14/2008 1:30:46 AM   
Husko


 

Posts: 82
Joined: 1/3/2005
From: Comstock Park, MI, USA
Status: offline
Just received my BeltCP from ka-planes today. I'm still waiting for the HBKing. Strange it didn't arrive with my other two orders. I'll wait until tomorrow and give them a call. Oh, and I crashed my HBFP for the first time. looks like I'll need on of those dog bone snaps and probably the top part of the heli where the blad attaches to the rest of the assembly. I should have known better but I was flying over grass so the moment I went to land, it got a caught and then tipped over while the blades were still going a little. I should have stayed in the school parking lot becuase it nicely skids while landing instead of tipping over ;( Anyway, here is a pic of my new bird!







< Message edited by Husko -- 5/14/2008 1:43:36 AM >


_____________________________

Flying an Esky HBFP. Crashing Belt CP and HBKV2
       Post #: 1

RE: Yay, my Blade CP is here! - 5/14/2008 1:34:15 AM   
nuttcaze


 

Posts: 1549
Joined: 1/3/2008
From: Johnson City, NY, USA
Status: offline 		thats a Belt CP, or am I missing something?


lol, just checking

< Message edited by nuttcaze -- 5/14/2008 5:44:37 PM >

(in reply to Husko)
       Post #: 2

RE: Yay, my Blade CP is here! - 5/14/2008 1:44:09 AM   
Husko


 

Posts: 82
Joined: 1/3/2005
From: Comstock Park, MI, USA
Status: offline 		lol whoops. Corrected.


_____________________________

Flying an Esky HBFP. Crashing Belt CP and HBKV2

(in reply to nuttcaze)
       Post #: 3

RE: Yay, my Belt CP is here! - 5/14/2008 2:44:06 AM   
homeunt


 

Posts: 974
Joined: 2/10/2008
From: Ectobicoke, ON, CANADA
Status: offline 		Husko, your antenna has to be placed wrapped around the straw then facing to the ground at the back left skid for the last wrap. Then zip tie them.

Otherwise, you'll get super glitch.

BTW.. I thought you were gonna buy only Belt-CP or HBK2 one of them, not both! lol. You'll be a little dis-satisfied with your King2. I used King2 as a trainer [Good idea since I had no experience whatsoever]

get rid of your esky ESC 25A, give it off to HBK2 if you are upping its stock motor to 3100kv. Get some 30A ESC

and paint that ugly white canopy lol.

_____________________________

This hobby is funny, if I got cash, I got no experience.
If i got experience, I see a giant hole on my wallet.

(in reply to Husko)
       Post #: 4

RE: Yay, my Belt CP is here! - 5/14/2008 2:49:07 PM   
Dietrich747


 

Posts: 41
Joined: 5/12/2008
From: Pasig, PHILIPPINES
Status: offline 		you better neaten up the wiring a bit

lookie


(in reply to homeunt)
       Post #: 5

RE: Yay, my Belt CP is here! - 5/14/2008 5:49:45 PM   
nuttcaze


 

Posts: 1549
Joined: 1/3/2008
From: Johnson City, NY, USA
Status: offline 		its funny cause I like my HBK II's way more then I like my Belt CP, they are much smoother, course that could just be cause they just a little less powerful, but they are sporting some decent Danlion motors

but def re-route the antenna, super glitch isn't the word for it, not sure what the word is but its worse then superglitch, maybe "Mega-Super-Major-Glitch" thats been the biggest prob with my Belt CP,but once I changed it over to 2.4ghz it was MUCH happier, heck even the rate gyro holds like no tomorrow, just unfortunate I keep crashing it

(in reply to Dietrich747)
       Post #: 6

RE: Yay, my Belt CP is here! - 5/14/2008 10:51:45 PM   
Husko


 

Posts: 82
Joined: 1/3/2005
From: Comstock Park, MI, USA
Status: offline 		Hey thanks for the suggestion everyone. I'll try to set the wire correctly

Dietrich, or anyone here. what is the the side of your heli to the rear of the ESC? I've seen that on other pictures of the CP, but mine doesn't have that. Why? here is a pic of the same side of my heli.




_____________________________

Flying an Esky HBFP. Crashing Belt CP and HBKV2

(in reply to nuttcaze)
       Post #: 7

RE: Yay, my Belt CP is here! - 5/15/2008 3:47:20 AM   
Dietrich747


 

Posts: 41
Joined: 5/12/2008
From: Pasig, PHILIPPINES
Status: offline 		what do you mean? my ESC is on the left side of my Belt-cp, since when i placed it there there was dangling wire length so i positioned the ESC that way in my pic so that there wouldn't be any loose wires

if you mean that bead like thing behind it, it is a ferrite bead or ring (blah! ), it reduces interference

(in reply to Husko)
       Post #: 8

Page:   [1]
All Forums >> RC Helicopters >> Electric RC Helis >> Esky Helicopters >> Yay, my Belt CP is here!
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.500RCU1