floats for senioretta (Full Version)

All Forums >> [RC Airplanes] >> Seaplanes

Message

---

seniorspud -> floats for senioretta (5/14/2008 2:19:15 PM) Hi trying to figuire out what floats would work for a sig senioretta weight is 4 Ib needed 36 " floats need some help thank"s Chick. trying to keep it light .

---

JimCasey -> RE: floats for senioretta (5/15/2008 3:25:08 AM) Read this. http://www.flyinglindy.homestead.com/skisandfloats.html

---

seniorspud -> RE: floats for senioretta (5/15/2008 12:47:15 PM) THANK YOU FOR THE INFO I DOWNLOADED IT TODAY AND WILL GET STARTED ON IT WRIGHT AWAY THANK"S AGAIN CHICK .

---

Yak18 -> RE: floats for senioretta (5/26/2008 10:29:55 PM) I am thinking about the new Sig Senorita ARF with 28" floats from http://www.classicaero.com/main.php These are really light and might look good covered in the same scheme as the Senorita ARF. Yak

---

JimCasey -> RE: floats for senioretta (5/27/2008 12:24:52 AM) I'm reluctant to rain on anybody's parade, but I would not use floats with holes in them. I don't even like to use floats with internal cavities (hollow floats) but if you're just a split piece of monokote away from a sunken airplane: thanks but no, thanks. These are nice, light, and can't leak: http://www.geocities.com/planefunfloats/

---

Yak18 -> RE: floats for senioretta (5/27/2008 10:40:39 PM) I think you are right there Jim. Fully sheeted and glassed is smarter. Thanks, Yak

---

seniorspud -> RE: floats for senioretta (6/2/2008 12:49:30 AM) [:)]HI, JIM I TOOK YOUR ADVISE AND BUILT THE FLOATS FOR MY SENIORETTA FROM THE CUNNINGHAM PLANS THEY TURNED OUT VERY NICE THE WEIGHT WAS 9 OZS FOR BOTH FLOATS THANK YOU FOR THE ADVICE CHICK.

---

Page: [1] 1

SITE MAP!   : :   FORUM RULES © 2001 - 2007 24-7 RC, LLC, all rights reserved.

0.140625