hobbico quick field charger mk2 (Full Version)

All Forums >> [RC Airplanes] >> Questions and Answers

Message

---

davepa -> hobbico quick field charger mk2 (5/14/2008 2:29:39 PM) I have a hobbico quick field charger mk 2 and when charging a 6 v 2500mha NiMH batttery after charging for awhile the charge ports led flashes red and green accompanied by audible warning tone.If i shut the charger off and turn it back on again it is fine for a couple hours and then does the same thing again.The manual says it could be a connection problem or reverse polarity but neither is the case.The charger and battery are both only about 3 months old and I am charging at a low rate of 0.4 amps.Also the battery i am using to run the charger has 12.5 volts.Does anyone know whats causing this problem. Thanks

---

alfredbmor -> RE: hobbico quick field charger mk2 (5/14/2008 5:50:55 PM) What type of battery are you using to power and charge? I use this type of battery: http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXL370&P=0 When it is fully charged should be around 13.4 Volts., if it is at 12.5 volts like you said, it is already discharged. Try a different battery like the one from your car maybe that will solve the problem.

---

Page: [1] 1

SITE MAP!   : :   FORUM RULES © 2001 - 2007 24-7 RC, LLC, all rights reserved.

0.0625