Carbon Paper? (Full Version)

All Forums >> [RC Airplanes] >> Scratch Building, Aircraft Design, 3D/CAD



Message

Broken Wings -> Carbon Paper? (5/17/2008 2:57:16 AM)

I had no idea that there were so many different kinds. What works the best on balsa?

Thanks in advance.



Laird SS -> RE: Carbon Paper? (5/17/2008 3:40:32 AM)

Probably the stuff intended for use with pencil since it is soft. The stuff used for typing is harder.



caribefoto -> RE: Carbon Paper? (5/17/2008 2:01:48 PM)

Where can you find it? I've tried everywhere locally but it must be nearly extinct since word processing replaced typewriters. Do art supply stores sell a different type?..........John



Broken Wings -> RE: Carbon Paper? (5/17/2008 3:14:35 PM)

I just bought 30 sheets of "pencil" type blue on * bay for $3.95



batchelc -> RE: Carbon Paper? (5/18/2008 1:42:49 PM)

If your talking about transferring from plans I have found that if you photocopy the plans and then iron them on with dry heat that works a lot better than tracing. If your drawing the plans yourself in CAD sometimes it helps to make the line thicker and make the copier contrast darker so more toner is transferred to the paper. Chris



MasterAlex -> RE: Carbon Paper? (5/18/2008 2:52:39 PM)


quote:

ORIGINAL: caribefoto

Where can you find it? I've tried everywhere locally but it must be nearly extinct since word processing replaced typewriters. Do art supply stores sell a different type?..........John

I've purchased it at the local OfficeMax ... its in with all the computer/copy paper and you have to look for it, but they have it. I'm sure the other office "super stores" carry it too.

-MA



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.1875