Anyone know how to use the swash plate lvling tool? (Full Version)

All Forums >> [RC Helicopters] >> Electric RC Helis >> Esky Helicopters



Message

Husko -> Anyone know how to use the swash plate lvling tool? (5/20/2008 7:14:10 PM)

Anyone have any direction on how to install and use this tool?
details: http://www.ka-planes.com/inc/sdetail/12689
[image]http://l.b5z.net/i/u/6082977/i/SL400HK2.jpg[/image]



boatchief -> RE: Anyone know how to use the swash plate lvling tool? (5/20/2008 7:21:02 PM)

You need to take everything above the swashplate off and disconnect the motor and slide the tool on the shaft then adjust the links to make the swashplate touch on all planes.



funflier -> RE: Anyone know how to use the swash plate lvling tool? (5/20/2008 9:32:30 PM)

Yep, then you put it all back together and test fly it and change all the links again. [:D]
Thats why its only a hobby, you have all the time in the world to tinker around with it.



Husko -> RE: Anyone know how to use the swash plate lvling tool? (5/20/2008 10:04:33 PM)

lol Is it ment to stay on the helicopter?



Druss -> RE: Anyone know how to use the swash plate lvling tool? (5/20/2008 10:25:02 PM)

no, it's meant to set up the swashplate only. once you have the swashplate level at mid, top and bottom stick you take if off and put the head back on.



court461 -> RE: Anyone know how to use the swash plate lvling tool? (5/21/2008 3:10:06 PM)


quote:

ORIGINAL: Druss

no, it's meant to set up the swashplate only. once you have the swashplate level at mid, top and bottom stick you take if off and put the head back on.


Yes, Druss is correct here. You want to get it level at the top, mid and bottom, not just in the middle, this is where the swash leveler really helps. You can set your travel of each servo to get a perfect movement throughout the range.



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.109375