Optic 6 for Piper J-3 CUB 1/4 scale  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       

All Forums >> Radios, Batteries, Clubhouse and more >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Hitec/MultiPlex Radios- Ask Hitec Customer Service >> Optic 6 for Piper J-3 CUB 1/4 scale
Page: [1]

Login
Message << Older Topic   Newer Topic >>
Optic 6 for Piper J-3 CUB 1/4 scale - 5/31/2008 4:43:46 PM   
tver


 

Posts: 1
Joined: 5/29/2008
From: molde, NORWAY
Status: offline 		I have Cmpro Piper J-3 CUB 1 / 4 scale.
Install electric motor regulator ESC and 8S batteries in Piper.I have not try fly yet.
I use the Hitec Optic 6 and receiver HPD-07RH. But I worry that the Optic 6 is good for big giant model airplane?
Or only for small model airplane?
       Post #: 1

RE: Optic 6 for Piper J-3 CUB 1/4 scale - 5/31/2008 9:18:11 PM   
A.T.


 

Posts: 550
Joined: 7/20/2002
From: Auckland, NEW ZEALAND
Status: offline
quote:

ORIGINAL: tver I have Cmpro Piper J-3 CUB 1 / 4 scale. Install electric motor regulator ESC and 8S batteries in Piper.I have not try fly yet. I use the Hitec Optic 6 and receiver HPD-07RH. But I worry that the Optic 6 is good for big giant model airplane?
Or only for small model airplane?

I have no concern whilst using an Optic 6 (with HFD-08RD receiver) to fly a 1/4 scale Sig J3 fitted with an O.S. FS.120Slll. After normal pre-flight range tests, any concern with your model would be the same if using any other RC system and EP aircraft - usually electrical noise, insufficient power to servos or binding of servos.
Electronic Speed Control - Why BEC and LVC cause most EP RX problems.
For further information which may ease any worries regarding your installation, please refer to sub sections "Receiver - FAQ, guides and aids to best reception" and "Glitches & Jitter in RX & Servo - causes and cures " at
Alan's Hobby, Model & RC FAQ Web Links.
Regards
Alan T.



(in reply to tver)
       Post #: 2

RE: Optic 6 for Piper J-3 CUB 1/4 scale - 6/10/2008 7:11:17 PM   
Eplane65


 

Posts: 114
Joined: 5/26/2003
From: La Crosse, WI, USA
Status: offline 		I'm flying a 1/5 scale Hangar 9 cub that is powered by an electric motor and my radio is an Optic 6. I have never had any problems. There is no reason why you can't use this radio in any model airplane whether it's large, small, gas or electric powered.

(in reply to A.T.)
       Post #: 3

Page:   [1]
All Forums >> Radios, Batteries, Clubhouse and more >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Hitec/MultiPlex Radios- Ask Hitec Customer Service >> Optic 6 for Piper J-3 CUB 1/4 scale
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.298RCU1