Amperage draw, servo synching, and data collection  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       



All Forums >> Radios, Batteries, Clubhouse and more >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Weatronic Support Forum >> Amperage draw, servo synching, and data collection
Page: [1]

Login
Message << Older Topic   Newer Topic >>
Amperage draw, servo synching, and data collection - 6/9/2008 5:51:48 PM   
Cody-RCU



Posts: 395
Joined: 1/12/2002
From: Plaistow, NH, USA
Status: offline 		When setting up my receiver to automatically synch my two JR 8711 rudder servos, during the automatic synching, the servos move MUCH farther than they do when I simply move them with the transmitter. Is this normal?

Secondly, I heard (in Ali's video, I believe) that you can read the current draw from each servo in the .nav file. However, when I look at it with NavView, I only see the current draw for the whole system, not each servo. I see the position of each servo, but not the amperage draw.

Also, it seems as though the data is logged at 1 second intervals. Can I change this to log it with more frequency?

Thanks in advance,

Cody
       Post #: 1

RE: Amperage draw, servo synching, and data collection - 6/9/2008 8:47:24 PM   
gerhardp


 

Posts: 91
Joined: 4/13/2007
From: Scappoose, OR, USA
Status: offline 		Hi Cody,
You can adjust the travel limit in the transmitter and under configuration in the receiver. In addition you have more options of mixing in the transmitter as well. There might be some sharing of travel that limits the elevator only use. The limit in the receiver curve is what it synchronization runs to.

The current readout in the NavView file is total current only. There is no singular servo current available. There is more data available as you look at the 2D view. You can access that information by transforming the Nav View file to a CSV-file which you then can look at with Excel. Look at the manual for more info for that option.

Thanks,

Gerhard

(in reply to Cody-RCU)
       Post #: 2

Page:   [1]
All Forums >> Radios, Batteries, Clubhouse and more >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Weatronic Support Forum >> Amperage draw, servo synching, and data collection
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.281RCU3