Deadband setting for ganged 7955 servos  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       

All Forums >> Radios, Batteries, Clubhouse and more >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Hitec/MultiPlex Radios- Ask Hitec Customer Service >> Deadband setting for ganged 7955 servos
Page: [1]

Login
Message << Older Topic   Newer Topic >>
Deadband setting for ganged 7955 servos - 6/19/2008 3:38:42 PM   
rajul



Posts: 6290
Joined: 6/18/2002
From: Missouri City, TX, USA
Status: online 		I plan to gang up two 7955 servos for my rudder. What is the recommended setting for deadband, and what's the pros and cons of setting higher or lower deadband? Thanks for the inputs

_____________________________

Mike Marks
RCU Moderator
Aerofly Support Representative http://www.aerofly.com/index.html
       Post #: 1

RE: Deadband setting for ganged 7955 servos - 6/29/2008 5:29:44 PM   
rajul



Posts: 6290
Joined: 6/18/2002
From: Missouri City, TX, USA
Status: online 		Hi Mike Mayberry, I appreciate some inputs from you on my question. Thanks

_____________________________

Mike Marks
RCU Moderator
Aerofly Support Representative http://www.aerofly.com/index.html

(in reply to rajul)
       Post #: 2

RE: Deadband setting for ganged 7955 servos - 6/30/2008 7:34:34 PM   
MikeMayberry



Posts: 2864
Joined: 1/15/2002
From: Poway, CA, USA
Status: offline 		Setting the deadband to the minimum setting of "1" will give you the best performance but requires presice matching. Setting the deadband higher will reduce the centering performance but provides some wiggle room if the servos are not perfectly matched preventing the servos from fighting each other.

Mike.

_____________________________

Hitec RCD Rep
http://www.hitecrcd.com

(in reply to rajul)
       Post #: 3

RE: Deadband setting for ganged 7955 servos - 7/1/2008 12:01:00 AM   
rajul



Posts: 6290
Joined: 6/18/2002
From: Missouri City, TX, USA
Status: online 		Hi Mike, wih the 5955TG servos, or the latest 7955TG, what is the typical deadband setting used for ganged servos e.g. rudder and ailerons? Thanks

_____________________________

Mike Marks
RCU Moderator
Aerofly Support Representative http://www.aerofly.com/index.html

(in reply to MikeMayberry)
       Post #: 4

RE: Deadband setting for ganged 7955 servos - 7/1/2008 6:00:16 PM   
MikeMayberry



Posts: 2864
Joined: 1/15/2002
From: Poway, CA, USA
Status: offline 		Default is "2" which many people use, but setting them to "1" will offer the best performance as mentioned above.

Mike.

_____________________________

Hitec RCD Rep
http://www.hitecrcd.com

(in reply to rajul)
       Post #: 5

Page:   [1]
All Forums >> Radios, Batteries, Clubhouse and more >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Hitec/MultiPlex Radios- Ask Hitec Customer Service >> Deadband setting for ganged 7955 servos
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.500RCU1