http://www.rcrivesud.com/ yes or no  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       

All Forums >> RC Helicopters >> Electric RC Helis >> E-Flite Helicopters >> http://www.rcrivesud.com/ yes or no
Page: [1]

Login
Message << Older Topic   Newer Topic >>
http://www.rcrivesud.com/ yes or no - 7/9/2008 5:07:24 AM   
stariondriver


 

Posts: 70
Joined: 4/17/2008
From: redmond, OR, USA
Status: offline 		so who is running the exreme stuff namely this. http://www.flyrcrivesud.com/1lower%20assembly.jpg
the grips and shaft and head? i see a few member have problems with the setup

i am gonna guess the battery tray and other stuff is worth getting. the price are super low right now i see the extreme motors are only $24.00 for the pair
       Post #: 1

RE: http://www.rcrivesud.com/ yes or no - 7/10/2008 10:23:48 PM   
stariondriver


 

Posts: 70
Joined: 4/17/2008
From: redmond, OR, USA
Status: offline 		sweet thanks for the reply! i will be sure to share any good results i have with you products!

(in reply to sonat)
       Post #: 2

RE: http://www.rcrivesud.com/ yes or no - 7/10/2008 10:51:54 PM   
HeliHappy


 

Posts: 1
Joined: 7/10/2008
From: , ON, CANADA
Status: offline 		Ok.

< Message edited by HeliHappy -- 7/11/2008 12:17:35 AM >

(in reply to sonat)
       Post #: 3

RE: http://www.rcrivesud.com/ yes or no - 7/28/2008 7:36:28 PM   
Dopesick



Posts: 185
Joined: 2/13/2004
From: San Jose, CA, USA
Status: offline 		I ordered their whole main shaft assembly. Lower and Upper Blades, and Skids.

Soon as they arrive I will be taking lots of photos, and writing a mini-review of my own.

_____________________________

Just another addicted R/C guy.

(in reply to HeliHappy)
       Post #: 4

RE: http://www.rcrivesud.com/ yes or no - 7/30/2008 2:08:42 AM   
Dopesick



Posts: 185
Joined: 2/13/2004
From: San Jose, CA, USA
Status: offline
quote:

ORIGINAL: Dopesick
I ordered their whole main shaft assembly. Lower and Upper Blades, and Skids.
Soon as they arrive I will be taking lots of photos, and writing a mini-review of my own.


Well... My parts arrived. They looked great, installed great. RAN great. I only have 1 issue that I'm not very happy with.

The flybar is VERY VERY fast reacting. To the point where I had a 90* impact with the ground. I'm not saying it's a bad thing, but it means flying in a breeze outside is OUT. Until I figure a way to slow down the flybars reaction.

On a good note, my heli is MUCH quieter now. And I do mean much quieter. To the point where I can't hear it 25' from me. I also was able to get my proportional adjustment back to center. Which I'm sure will add to my run times a bit.

Oh, vertical power... HOLY MOLY... is the only way to describe it.

The blades are tougher then stock, but they are by no means "non-breakable".






_____________________________

Just another addicted R/C guy.

(in reply to Dopesick)
       Post #: 5

RE: http://www.rcrivesud.com/ yes or no - 7/30/2008 3:22:05 AM   
voodooftw


 

Posts: 8
Joined: 7/28/2008
From: , BC, CANADA
Status: offline 		I ordered the entire kit today, it looks like he dropped his prices. It's a smoking deal compared to what I've seen around the internet. Anyways, I hope to see the stuff tomorrow and I'll install it on my CX2. I also picked up a Blade 400 today, I'm not ready to fly it yet though.

(in reply to stariondriver)
       Post #: 6

RE: http://www.rcrivesud.com/ yes or no - 7/30/2008 3:30:38 AM   
Dopesick



Posts: 185
Joined: 2/13/2004
From: San Jose, CA, USA
Status: offline
quote:

ORIGINAL: Dopesick
The flybar is VERY VERY fast reacting. To the point where I had a 90* impact with the ground. I'm not saying it's a bad thing, but it means flying in a breeze outside is OUT. Until I figure a way to slow down the flybars reaction.


Well all, I have good news and bad. My personal opinion is the flybar mount needs some way of being adjustable. It is just too damn fast.

So, in my original genius *(read as Redneck engineering), I have come up with a solution. More resistance.

I added a secondary link from the flybar to upper blade mount. It reacts MUCH like a stock CX2, only much more precise.

I'm really liking this setup now.




Oh and those of you who would like use the stock landing gear, and stock canopy with a Xtreme tail boom. Here's a tip. Remove the fake rear rotor blades. And weight the very tip of your canopy (I found the brass weight off of a stock CX2 flybar) brought my CG right where it should be!

_____________________________

Just another addicted R/C guy.

(in reply to Dopesick)
       Post #: 7

RE: http://www.rcrivesud.com/ yes or no - 8/1/2008 4:02:33 PM   
sonat


 

Posts: 37
Joined: 9/26/2006
From: montreal, QC, CANADA
Status: offline 		hi
this is Sonny
nice pic: Dopesick

hope you can enjoy the EXxtreme core V3 final edition
you can get replacement parts if you
break something a dealer price here the link: www.rcrivesud.com

(in reply to Dopesick)
       Post #: 8


Page:   [1]
All Forums >> RC Helicopters >> Electric RC Helis >> E-Flite Helicopters >> http://www.rcrivesud.com/ yes or no
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.484RCU1