Best Clutch Bearings.?
#2
Senior Member
Joined: Jun 2006
Posts: 1,379
Likes: 0
Received 0 Likes
on
0 Posts
From: Milledgeville,
GA
personally i would say avid revolution bearings but they are not available at amain(http://www.avidrc.com/shop/?action=category&id=1)
what size are you looking for?
i think amain only has protek and tko bearings
what size are you looking for?
i think amain only has protek and tko bearings
#3
Thread Starter
Senior Member
Joined: Nov 2007
Posts: 3,155
Likes: 0
Received 0 Likes
on
0 Posts
From: Toronto,
ON, CANADA
Thanks
Size would be 5x10mm
Saw a few ceramic bearings, are they worth it.?
Im using HoBao Clutch Bearings at the moment, and they last approx half a gallon...
I always change them out before a race, and after a race.. Im spending a small fortune in these bearings [&:].
Size would be 5x10mm
Saw a few ceramic bearings, are they worth it.?
Im using HoBao Clutch Bearings at the moment, and they last approx half a gallon...
I always change them out before a race, and after a race.. Im spending a small fortune in these bearings [&:].
#6
Thread Starter
Senior Member
Joined: Nov 2007
Posts: 3,155
Likes: 0
Received 0 Likes
on
0 Posts
From: Toronto,
ON, CANADA
ORIGINAL: sh0wtime
i find the "Ultimate Racing" ceramics last a VERY long time
i find the "Ultimate Racing" ceramics last a VERY long time
http://www.modelixracing.com/ultimat...1&lang=eng&n=1
Know where I could buy them and give them a try online.? Cant seem to find an " Add To Cart " button on their site
Thanks in advance.
#7

My Feedback: (6)
Joined: Apr 2004
Posts: 759
Likes: 0
Received 0 Likes
on
0 Posts
From: White Stone,
VA
ORIGINAL: youwish16
personally i would say avid revolution bearings but they are not available at amain(http://www.avidrc.com/shop/?action=category&id=1)
what size are you looking for?
i think amain only has protek and tko bearings
personally i would say avid revolution bearings but they are not available at amain(http://www.avidrc.com/shop/?action=category&id=1)
what size are you looking for?
i think amain only has protek and tko bearings
#8
Thread Starter
Senior Member
Joined: Nov 2007
Posts: 3,155
Likes: 0
Received 0 Likes
on
0 Posts
From: Toronto,
ON, CANADA
Giving the Avid's a try too.
Got 10 of the Standard Revolutions, and 4 of the Ceramic Metal bearings in my Cart.
Those fine.?
Got 10 of the Standard Revolutions, and 4 of the Ceramic Metal bearings in my Cart.
Those fine.?
#9
Senior Member
Joined: Jun 2006
Posts: 1,379
Likes: 0
Received 0 Likes
on
0 Posts
From: Milledgeville,
GA
yea. i have almost 2 gallons on the bearings in my clutch(avid revolutions) and there still 100%. these things are great. gonna change them for my race this weekend though. i dont know how the ceramics are cause im cheap and stick with the $1 bearings lol
#10
I buy the $10 tube of 10 protek bearings at amain. They last anywhere from 1 gallon to 2. Then I change them out. Cheap insurance.
They also have 5 ceramic bearings for $10.
I have learned that all bearings are pretty much the same. If you dont set up your clutch right you will eat bearings no matter what.
They also have 5 ceramic bearings for $10.
I have learned that all bearings are pretty much the same. If you dont set up your clutch right you will eat bearings no matter what.
#11
Senior Member
Joined: Sep 2007
Posts: 477
Likes: 0
Received 0 Likes
on
0 Posts
From: Boise,
ID
ORIGINAL: Nik.
I buy the $10 tube of 10 protek bearings at amain. They last anywhere from 1 gallon to 2. Then I change them out. Cheap insurance.
They also have 5 ceramic bearings for $10.
I have learned that all bearings are pretty much the same. If you dont set up your clutch right you will eat bearings no matter what.
I buy the $10 tube of 10 protek bearings at amain. They last anywhere from 1 gallon to 2. Then I change them out. Cheap insurance.
They also have 5 ceramic bearings for $10.
I have learned that all bearings are pretty much the same. If you dont set up your clutch right you will eat bearings no matter what.
#14
i've seen the ae bearings last 2 gallons. i've been using the racers edge or panther $10 sleeve and they go about every half gallon no matter how i set up the clutch, the ae's still kickin' though.




