what brushless system for e-savage?  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       


AXIAL AX10 SCORPION CRAWLER 12MM HEX WHEEL EXTENSIONS - RTR
Seller:  wheelextensions
Details:   $20.00   |  8/25/2008   |  Classified Ad
We will rotate YOUR AD in this spot if you select "Forum Featured" when placing or editing your ad!

All Forums >> RC Cars, Buggies, Trucks, Tanks and more >> RC Electric Off-Road Trucks, Buggies, Truggies and more >> what brushless system for e-savage?
Page: [1]

Login
Message << Older Topic   Newer Topic >>
what brushless system for e-savage? - 7/17/2008 8:29:36 PM   
xhaliex


 

Posts: 162
Joined: 6/5/2007
From: Neiden, NORWAY
Status: offline 		what systems are good for the e savage?

_____________________________

HPI Rush evo W/O.S CV-RX .18
       Post #: 1

RE: what brushless system for e-savage? - 7/17/2008 8:37:31 PM   
Always Dreamin



Posts: 6648
Joined: 1/22/2007
From: Mission Viejo, CA, USA
Status: offline 		ESC's

Mamba Max w/ bec
Mamba Monster Max w/o bec

Motors:

9xl
8xl
10xl
Neu
Feigao
Monster motor when it comes out

Combo's:

Mamba monster combo when it's released
Hv maxx

The cheapest would be a Mamba with a bec and one of the xl's.

_____________________________

Two brushless Rustlers, Bandit, Stampede.

(in reply to xhaliex)
       Post #: 2

RE: what brushless system for e-savage? - 7/18/2008 12:33:24 AM   
xhaliex


 

Posts: 162
Joined: 6/5/2007
From: Neiden, NORWAY
Status: offline 		thx



whats bec?

_____________________________

HPI Rush evo W/O.S CV-RX .18

(in reply to Always Dreamin)
       Post #: 3

RE: what brushless system for e-savage? - 7/18/2008 1:03:24 AM   
Always Dreamin



Posts: 6648
Joined: 1/22/2007
From: Mission Viejo, CA, USA
Status: offline
quote:

ORIGINAL: xhaliex

thx



whats bec?


battery eliminating circuit.

it's needed for the Mamba max and not needed for the mamba monster. a mamba max with a bec ($20) is still cheaper then the stock mamba monster max.

_____________________________

Two brushless Rustlers, Bandit, Stampede.

(in reply to xhaliex)
       Post #: 4

RE: what brushless system for e-savage? - 7/18/2008 3:29:37 AM   
mycarisaser


 

Posts: 1471
Joined: 2/17/2004
From: poplar branch, NC, USA
Status: offline 		The only issue is that the e-savage in stock form will not hold a xl motor(its too long) the poplar motor on e-savage forms is the 9L. I use it also and it runs great with 4s2p lipos. You can flip the tranny around to make the xl motors work but the diffs,slipper, and driveshafts will not hold up long to the abuse from the extra torque. The novak hv motors put out alot less torque than an xl motor so if you go that route it will save your drivetrain(you still have to flip the tranny around to get it to fit)

(in reply to Always Dreamin)
       Post #: 5

RE: what brushless system for e-savage? - 7/18/2008 4:40:38 AM   
Always Dreamin



Posts: 6648
Joined: 1/22/2007
From: Mission Viejo, CA, USA
Status: offline
quote:

ORIGINAL: mycarisaser

The only issue is that the e-savage in stock form will not hold a xl motor(its too long) the poplar motor on e-savage forms is the 9L. I use it also and it runs great with 4s2p lipos. You can flip the tranny around to make the xl motors work but the diffs,slipper, and driveshafts will not hold up long to the abuse from the extra torque. The novak hv motors put out alot less torque than an xl motor so if you go that route it will save your drivetrain(you still have to flip the tranny around to get it to fit)


Man, that really sucks...

Good to know, though.

_____________________________

Two brushless Rustlers, Bandit, Stampede.

(in reply to mycarisaser)
       Post #: 6

RE: what brushless system for e-savage? - 7/18/2008 11:19:30 PM   
xhaliex


 

Posts: 162
Joined: 6/5/2007
From: Neiden, NORWAY
Status: offline 		so will this motor :'
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=370057500354&Category=84444&_trksid=p3907.m29

and this esc:
http://www.b-p-p.com/product.php?productid=154&cat=48&page=1

work good? wil any 5mm pinions fit? what gearing wil be good?

will this motor fit, will the 60 mm version fit?

is it hard to flip the tranny?

_____________________________

HPI Rush evo W/O.S CV-RX .18

(in reply to Always Dreamin)
       Post #: 7

RE: what brushless system for e-savage? - 7/19/2008 12:34:03 AM   
mycarisaser


 

Posts: 1471
Joined: 2/17/2004
From: poplar branch, NC, USA
Status: offline 		no the 540s motor ar to small . you need the 540L motors(60mm). Go to http://e-savage.com/ They have every thing you need to know about the e-savage.

That esc will work fine

(in reply to xhaliex)
       Post #: 8

RE: what brushless system for e-savage? - 7/28/2008 4:15:29 PM   
xhaliex


 

Posts: 162
Joined: 6/5/2007
From: Neiden, NORWAY
Status: offline 		what bec wil be good for the mamba max?



the setup wil be 9l motor, 12 cell nimh, bec and mamba max esc. will that be a good combo ?

edit:
what is the pitch on the savage spur, and what size pinion is recomended to use?

< Message edited by xhaliex -- 7/28/2008 4:23:15 PM >

_____________________________

HPI Rush evo W/O.S CV-RX .18

(in reply to mycarisaser)
       Post #: 9

RE: what brushless system for e-savage? - 7/28/2008 8:17:57 PM   
mycarisaser


 

Posts: 1471
Joined: 2/17/2004
From: poplar branch, NC, USA
Status: offline 		Its a 32pitch spur and pinion. The pinoin I would buy a 18 and 19 tooth. Start with the 18 and see how it its and if temps will allow go to the 19 tooth.

Castle make a great ubec. Its voltage can be adjusted too(I have mine at 7 volts) and it can handle 10amps. Seems to be the best deal out right now.

If you are going to use nimh batteries make sure you have some good ones b/c it will make all the diffence in the world. Two 7 cell batteries will make it run really well too!(just a thought , I run mine on two 2s lipos)

< Message edited by mycarisaser -- 7/28/2008 8:18:56 PM >

(in reply to xhaliex)
       Post #: 10

RE: what brushless system for e-savage? - 7/28/2008 8:26:42 PM   
carlbellybutton10


 

Posts: 552
Joined: 6/6/2007
From: rockwall, TX, USA
Status: offline 		i am putting a mamba max w/ the castle craetions BEC and a feigao 7xl in my emaxx. this is not mine but here is a vid



http://youtube.com/watch?v=8gP9gT0aKH0&feature=related

(in reply to mycarisaser)
       Post #: 11

RE: what brushless system for e-savage? - 7/29/2008 12:52:30 AM   
mycarisaser


 

Posts: 1471
Joined: 2/17/2004
From: poplar branch, NC, USA
Status: offline 		I have a 7xl in my e-revo right now(until the castle monster max combo comes out). It runs good but I cant keep the temps in check. Motor runs 200*F+. The e-maxx and e-revo need a bigger motor b/c they are bigger than the e-savage(by alot, you should see the two next to each other) If I could get the e-savage to handle the extra torque of the xl motors I would get a road boy extended chassis and put it in.

(in reply to carlbellybutton10)
       Post #: 12

Page:   [1]
All Forums >> RC Cars, Buggies, Trucks, Tanks and more >> RC Electric Off-Road Trucks, Buggies, Truggies and more >> what brushless system for e-savage?
Page: [1]





Jump to: