Programing JR9303  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       

All Forums >> Radios, Batteries, Clubhouse and more >> RC Radios, Transmitters, Receivers, Servos, gyros >> Programing JR9303
Page: [1]

Login
Message << Older Topic   Newer Topic >>
Programing JR9303 - 7/29/2008 1:37:38 AM   
Helcat



Posts: 73
Joined: 2/8/2003
From: Fairport, NY, USA
Status: offline 		I have a JR 9303 radio that I want to program the Flap switch so I have the following setup:
Position 0 - low rates
Position 1 - High rates
Position 2 - Maximum Throws for 3D flying

Way back when Danny was supporting the JR forum, he posted this setup. I searched and can not find it. Anyone know how this is done?

Thanks!

_____________________________

Mike Pence
http://www.pencenaround.com/rc/rcplanes.cfm
       Post #: 1

RE: Programing JR9303 - 7/29/2008 3:15:26 AM   
onewasp


 

Posts: 1369
Joined: 12/11/2002
From: USA, USA
Status: offline 		Simply set up flight modes with the flap switch as the designated switch.
In the X9303 instructions this begins on page A-6.

_____________________________

The ground reached up and smote my airplane

(in reply to Helcat)
       Post #: 2

RE: Programing JR9303 - 7/29/2008 3:16:52 AM   
Howard


 

Posts: 246
Joined: 9/12/2002
From: Viera, FL, USA
Status: offline 		Helcat,

You will need to use the Flight Mode feature which can be assigned to either the flap switch or the Aux 2 switch (both of which are 3 position switches) and then simply set the flight control surface movement that you want for each flight mode (0,1,2). Go to an unused model, inhibit the flap switch and then select the flap switch when you enable flight modes and you will see three possible selections for each flight control surface deflection in the DR/EXP setting. Read the section on flight modes in the manual and it will point you in the right direction. Onewasp has provided the page number for you - let us know if you need additional assistance.

Howard

< Message edited by Howard -- 7/29/2008 3:19:42 AM >

(in reply to Helcat)
       Post #: 3

RE: Programing JR9303 - 7/31/2008 2:27:58 AM   
Helcat



Posts: 73
Joined: 2/8/2003
From: Fairport, NY, USA
Status: offline 		Howard and onewasp
Thanks for the help. This has worked out exactly the way I wanted it.

Mike

_____________________________

Mike Pence
http://www.pencenaround.com/rc/rcplanes.cfm

(in reply to Howard)
       Post #: 4

Page:   [1]
All Forums >> Radios, Batteries, Clubhouse and more >> RC Radios, Transmitters, Receivers, Servos, gyros >> Programing JR9303
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.313RCU3