hitec eclipse 7

hitec eclipse 7 (Full Version)

All Forums >> [Radios, Batteries, Clubhouse and more] >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Hitec/MultiPlex Radios- Ask Hitec Customer Service

Message

bigal -> hitec eclipse 7 (8/28/2008 2:23:36 AM)
I have a hitec eclipse 7 and whenever I switch to a different flight mode my rudder and elevator move a little, like they have a different trim setting. I do have a mix set up but it is off at the time. Any ideas why this is happening Thanks, Al

Brendan Lugo -> RE: hitec eclipse 7 (8/28/2008 3:12:24 PM)
You have seperate trim memories for the different flight modes so my guess would be that your trims are not set to the same percentage between the different flight modes.

bigal -> RE: hitec eclipse 7 (8/29/2008 1:30:39 AM)
That was it. Thanks

Page: [1]

9.399414E-02