Thottle servo glitches on Python Questions  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       



All Forums >> RC Airplanes >> Giant Scale Aircraft - 3D & Aerobatic >> Aero-Works Support >> Thottle servo glitches on Python Questions
Page: [1]

Login
Message << Older Topic   Newer Topic >>
Thottle servo glitches on Python Questions - 9/1/2008 5:22:24 PM   
gregg660


 

Posts: 38
Joined: 7/28/2004
From: Paulsboro, NJ, USA
Status: offline 		Anyone seen glitches due to the thottle servo being mounted close by design to the ignition modual?I seem to get intermitant issues when engine is runing only. DA 50 being used. Noticed it visualy while cowl off setting needles for new Vess prop tyout. It seems to have gotten better since eleimating a sevo extention and changing the servo. I am using a5645..but have a metal aluminum control arm on it. I have ordered a 5625 for speed and intend to use a nylon arm. The rod is carbon with 40/40 ball links on each end. Anyone have to move the servo back into the body/??? Which will prove difficult. I just need it to reponded when I want it to. I already lost one due to another issue.
Thanks,
Gregg
       Post #: 1

RE: Thottle servo glitches on Python Questions - 9/1/2008 6:24:58 PM   
reyn3545



Posts: 996
Joined: 7/1/2006
From: Alpharetta, GA, USA
Status: offline 		If you're seeing glitches... be SURE to get them under control, at any throttle setting, before you let this thing in the air! I had a similar problem on an AW 90-120 yak, thought I had it fixed, and found out the hard way that I was wrong. It turned out to be a bad ignition module, emitting too much RFI, but it cost me a plane to find that out.

If you're still running 72MHz, be absolutely sure to eliminate any interference... If your throttle servo is less than a foot from the ignition module... move it back! That plane's got plenty of room to mount the servo back, and you can use nyrod to get to the motor.

(in reply to gregg660)
       Post #: 2

Page:   [1]
All Forums >> RC Airplanes >> Giant Scale Aircraft - 3D & Aerobatic >> Aero-Works Support >> Thottle servo glitches on Python Questions
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.234RCU2