kenazzo2000

hi anyone got a saab viggen ?

wikman

Hi
This is the Viggen that I was using at WJM99.
I am also working on a new one, and it might be equipped with thrust vectoring.


Regards
Anders

kenazzo2000

thats nice when you have some pictures of it send them too me please

chrigui

wowowow 1999 3°jwm zelteg......
i was in italian team with f86!!!!

kenazzo2000

thats good who won ?

Lasse Palm

Here is some pictures of my Viggen from 6th Jet World Masters in Jakabszallas in Hungary.

kenazzo2000

first of all nice pictures do you fly your saab viggen a lot ? and do you know were i could get a bigger saab viggen ? when its in the sky woow its hard to beat lovely site

kenazzo2000

hi what turbine did you use ? thanks

JohnMac

Here a few shots of the one I built from the old Jim Fox DF kit. It had a wren 54 in it which was just perfect.
regards,

john

kenazzo2000

my saab viggen has got an mw54. Have you got a video of the jet in flight ? i havent flown mine because the engine is on my car and yours is a nice plane

wikman

If I remember correct it was 2 Italian F86?
My Viggen is still alive!



Kenazzo 2000
I am going to use a Hawk 100R. That gives the aircraft more than enough power. 2L of fuel and 10minutes endurance.
Another Swede, Hans has also been flying with a Viggen 1/9 scale with a Hawk 100R this summer, more than enough power, nice vertical performance equal equipped as my Viggen.
Hans was also flying with a Viggen in Zeltweg 1999.

Regards
Anders

kenazzo2000

thats nice is there a bigger saab viggen ?

iiievolution

Jim Fox should reproduce his viggen like he has done with some of his other designs

Paul

kenazzo2000

iiievolution yes he should and should build a bigger one

wikman

Yes
There are three different sizes:
1/10
1/9
1/8


All of them were made of Einar J
My 2 are scale 1/9

regards
Anders

kenazzo2000

were can i get a 1/8 one from ? thankyou and what size in inches is your viggen ? thankyou

wikman

Sorry
But I do not think that Einar makes them any more.
Maybe you could find one at aftermarket, but the are wanted so do not hope at to much.

Lasse Palm

Hi Kenazzo!
I lost my Viggen in a crash for about two years ago .I used a Simjet
3000 in the model.
Do not know if there is anyone who manufactures a kit of the
Viggen.
My model was a Einar Jonsson design 1/8 scale and I know he also has
sold the molds to a Danish guy who did not pay him for the molds.
In other words, he got ripped off.

Here are some pics of Einar Jonsson own design of the Swedish JAS 39
Gripen 1/6 Super scale.

Sorry guys!
Mr Einar Jonsson don´t make kits of this fine scale model.
Einar!
Does not want it to become copied by rogue types!!

Lasse Palm
Team Jet Sweden

Lasse Palm

A small parenthesis!
Jim Fox Viggen in scale 1/10 is a copy of Mr Einar Jonsson 1/10 Viggen, Jim Fox had even the insolent to send a copy of Einars drawings in their kits.So he(Einar) got ripped of twice.
The problem is that Mr Einar Jonsson is to good-natured like all swedes.

Lasse Palm
Team Jet Sweden

kenazzo2000

im trying to find one 1/8 do you know how big the 1/8 is ? ive got another viggen made like the camoflage one ive got

kenazzo2000

how big is the 1/8 ? thankyou

Lasse Palm

Viggen: 1:8 scale

Length: 1900mm
Wingspan: 1300mm


Lasse P

kenazzo2000

thanks lasse palm ive got two they are both 1500 mm so there smaller . i wish i can find the big one this one ive got is made from a mold by my friend