2 packs 1 switch? (Full Version)

All Forums >> [Radios, Batteries, Clubhouse and more] >> Batteries & Chargers



Message

onewinglow -> 2 packs 1 switch? (3/24/2002 9:56:32 AM)

I am running 2 bat packs through a y harness with one switch. Is there any draw backs ( besides weight) that you know of? Trying to get away from fast charging at the feild. These packs are NiMH 1200mah. Switch is Cermark heavy duty.
Thanks:
Scott



Jazzy -> Parallel Operation (3/24/2002 11:34:54 AM)

Look in Red's battery clinic under Parallel operation.

[url]www.rcbatteryclinic.com[/url]



Vince -> 2 packs 1 switch? (3/25/2002 5:36:04 AM)

One of the purposes of running two battery packs and two switches is redundancy. By running both battery packs from a "Y" harness and using one switch, all you have gained is extra capacity. You still have a single source of potential failure...the single switch.

Vince



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.046875