RE: Hangar 9 150 Size P-51

RE: Hangar 9 150 Size P-51 (Full Version)

All Forums >> [RC Airplanes] >> RC Warbirds and Warplanes

Message

C.ops -> RE: Hangar 9 150 Size P-51 (4/1/2008 3:38:40 PM)
Just bought my H-9 1.50 P51.from Hobby town. The engine reccomended is the Zenoah 26cc ei, Has any one put this engine in?, is it gutsy enough? And hopefully with as little cutting on the cowl as possible. Any info will be appreciated, as Ive been out of this hobby over 25 yrs. C.ops

kahloq -> RE: Hangar 9 150 Size P-51 (4/1/2008 3:47:28 PM)
It'll fly the plane, but not very fast. The benchmark prop is a 16x8 according to Horizon. This plane kinda needs a larger prop then that. You'd be better off with a G38. It can spin an 18x10, but an 18x8 is probably more in the top rpm band

kahloq -> RE: Hangar 9 150 Size P-51 (4/1/2008 3:52:12 PM)
There is alot more info in this thread and its about the newer 80" H9 1.50 P-51 whereas this one started off on the original 77" More ppl visit this other thread and there are a good many more examples of gas motor installations: http://www.rcuniverse.com/forum/m_5120982/tm.htm

tricountyconst07 -> RE: Hangar 9 150 Size P-51 (9/30/2008 2:48:47 AM)
Hey guys am looking for a 77 inch wing for the hanger 9 p-51 150

Page: << < prev 23 24 25 26 27 28 29 30 31 [32]

SITE MAP! : : FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

0.21875