wet receiver

wet receiver (Full Version)

All Forums >> [Radios, Batteries, Clubhouse and more] >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Hitec/MultiPlex Radios- Ask Hitec Customer Service

Message

varmit -> wet receiver (6/22/2003 3:31:00 AM)
My HITEC receiver and receiver crystal got wet. I took it apart & dryed it with a hair dryer (real good) Should I trust it to operate correctly now ? Thanks in advance Varmit

golf_lake -> wet receiver (6/23/2003 2:05:07 PM)
The crystal should be fine as its sealed, the receiver can be a funny thing, I have seem them die completely when wet and I have poured water out of them, cleaned and dried and they work perfectly. Its very important to clean and dry as quickly as possible, the best stuff if you can find it is printed circuit cleaner that is used to clean computer boards. Then thoroughly dry. Before testing.

MikeMayberry -> wet receiver (6/27/2003 11:15:15 PM)
It's hard to say. Keep an eye out for corrosion.

Page: [1]

0.109375