Sniff....My Dremel Table Saw #580 is toast.  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       

All Forums >> RC Airplanes >> Scratch Building, Aircraft Design, 3D/CAD >> Sniff....My Dremel Table Saw #580 is toast.
Page: [1]

Login
Message << Older Topic   Newer Topic >>
Sniff....My Dremel Table Saw #580 is toast. - 3/29/2002 11:42:24 PM   
GSNut



Posts: 408
Joined: 3/22/2002
From: Thornton, CO,
Status: offline 		After 20+ yrs the faithfull saw bit the big one..
Arbor bearings went bad and stalled the motor, instant smoke and stink, but no fire.

Time to buy a new Saw, but Dremel no longer makes the old 580 and has no blades available..

There are some used ones for sale on ebay, but am thinking about a little better and of course more bucks. Anybody got a Micro Mark?

URL: http://www.dxmarket.com/micromark/

Or can someone point me in another direction..
I already have a 10" but don't want to bring it into the house modeling area. $ 299.95 is just a bit more than what I want to pay with out some
recomendations.

I already have a bandsaw, power belt sander scroll saw and drill press, all bench mounted.

TIA

Attachments
Click to see fullsize image.
Click for fullsize


< Message edited by GSNut -- Mar 29 2002 6:49PM >


_____________________________

Cheers!
       Post #: 1

micro-mark - 3/30/2002 1:00:56 AM   
majortom-RCU


 

Posts: 1583
Joined: 12/11/2001
From: Merrimack, NH, USA
Status: offline 		I have been using the Micro-mark hobby saw for a couple years, use it almost every day. The blade seems kind of flimsy to look at, but I have been cutting balsa, plywood (up to 1/4" and plastic with it and don't notice any dulling of the blade. On occasion I have wished for more depth of cut, but I'd have to say this has given me good service. I'd get another if this one pooped out (which it shows no signs of).

(in reply to GSNut)
       Post #: 2

Sniff....My Dremel Table Saw #580 is toast. - 3/31/2002 7:51:35 AM   
turbines


 

Posts: 126
Joined: 12/18/2001
From: Azle, TX, USA
Status: offline 		There is one on Ebay right now.

_____________________________

Never! ever turn the knob all the way up to ten!

(in reply to GSNut)
       Post #: 3

Sniff....My Dremel Table Saw #580 is toast. - 4/4/2002 2:39:58 AM   
turbines


 

Posts: 126
Joined: 12/18/2001
From: Azle, TX, USA
Status: offline 		There is ANOTHER one on Ebay right now.

_____________________________

Never! ever turn the knob all the way up to ten!

(in reply to GSNut)
       Post #: 4

Sniff....My Dremel Table Saw #580 is toast. - 4/5/2002 6:52:07 PM   
GSNut



Posts: 408
Joined: 3/22/2002
From: Thornton, CO,
Status: offline 		Thanks for the replies all, am watching a couple of auctions. Also heard that there is a NIB Dremel 580 for sale at a yard sale here.

Thanks Again!


_____________________________

Cheers!

(in reply to GSNut)
       Post #: 5

Page:   [1]
All Forums >> RC Airplanes >> Scratch Building, Aircraft Design, 3D/CAD >> Sniff....My Dremel Table Saw #580 is toast.
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.516RCU3