Shenqqi Diff

Shenqqi Diff (Full Version)

All Forums >> [RC Cars, Buggies, Trucks, Tanks and more] >> RC Giant Scale Cars

Message

delboy630 -> Shenqqi Diff (9/26/2009 5:39 PM)
One of the bevel gears on the Shenqqi Diff stripped. Stripped down the diff gear box and one of the larger bevel gears which the rear hub connects to is stripped, does the HPI bevel gears fit the rear drive hub? Read somewhere that both the KM and Shenqqi Bajas rear hubs have a slightly larger dia than the HPI ones and that this was due to copyright laws i.e there needed to be 10% difference between the original and th clone, so KM and TQ opted to make the change in the drivetrain. So is it a case that I will need to get a whole new diff or just the bevel gears? Lookforward to the responses.

dc2 man -> RE: Shenqqi Diff (9/26/2009 5:55 PM)
do you want a tip from me. FG DIFF ALLOY COMPLETE........end of story....... just after spotting that its a baja,but an fg one could be modified to fit.

slawhammer -> RE: Shenqqi Diff (9/26/2009 6:20 PM)
Use diff gear set from Duratrac.....Firehammer...they are the same as what you have now.....only better gears....The cost is like$39.95 USD...... You can go FG rear diff....but you also have to use different inner & outer drive cups.....as well.....repairs for the internal Fg diff is very costly...... That is my suggestion on using the Duratrac diff gears...........Slawhammer

TACTICAL_RASTA -> RE: Shenqqi Diff (9/26/2009 7:34 PM)
quote: ORIGINAL: delboy630 One of the bevel gears on the Shenqqi Diff stripped. Stripped down the diff gear box and one of the larger bevel gears which the rear hub connects to is stripped, does the HPI bevel gears fit the rear drive hub? Read somewhere that both the KM and Shenqqi Bajas rear hubs have a slightly larger dia than the HPI ones and that this was due to copyright laws i.e there needed to be 10% difference between the original and th clone, so KM and TQ opted to make the change in the drivetrain. So is it a case that I will need to get a whole new diff or just the bevel gears? Lookforward to the responses. **** is everyone talking about? just upgrade to the hpi baja ss diff for easy replacement, why bother trying to modify an fg diff when there are far better suited diffs available for the baja made by hpi? check ebay for a complete ss diff they are around $50 or so and far more durable than the standard shenqqi diff!

delboy630 -> RE: Shenqqi Diff (9/26/2009 7:36 PM)
Thanks for the replies, I will be getting the whole HPI diff., just makes sense really. Delboy

csp1971 -> RE: Shenqqi Diff (9/27/2009 2:52 AM)
quote: ORIGINAL: TACTICAL_RASTA quote: ORIGINAL: delboy630 One of the bevel gears on the Shenqqi Diff stripped. Stripped down the diff gear box and one of the larger bevel gears which the rear hub connects to is stripped, does the HPI bevel gears fit the rear drive hub? Read somewhere that both the KM and Shenqqi Bajas rear hubs have a slightly larger dia than the HPI ones and that this was due to copyright laws i.e there needed to be 10% difference between the original and th clone, so KM and TQ opted to make the change in the drivetrain. So is it a case that I will need to get a whole new diff or just the bevel gears? Lookforward to the responses. **** is everyone talking about? just upgrade to the hpi baja ss diff for easy replacement, why bother trying to modify an fg diff when there are far better suited diffs available for the baja made by hpi? check ebay for a complete ss diff they are around $50 or so and far more durable than the standard shenqqi diff! Well sport, some are not aware that Shengqi makes HPI Baja clones, so it sounded like he might have been talking an FG Baja.

borley1863 -> RE: Shenqqi Diff (9/27/2009 3:50 PM)
Agreed buy a ss diff off of ebay that`s what`s in mine, pretty bullet proof. Guy

Page: [1]

SITE MAP! : : FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

2.828125