C.G. OF HANGAR-9 P40 WARHAWK

C.G. OF HANGAR-9 P40 WARHAWK (Full Version)

All Forums >> [RC Airplanes] >> RC Scale Aircraft

Message

georgek54 -> C.G. OF HANGAR-9 P40 WARHAWK (10/1/2009 4:57 PM)
Good Day to all friends Could somebody please inform me on the correct C.G. of HANGAR 9 P-40 WARHAWK ? It is the one with 1.68 m span. Thank you in advance George

Edwin -> RE: C.G. OF HANGAR-9 P40 WARHAWK (10/1/2009 6:50 PM)
I used the recommended in the instructions, 3" from the leading edge at the fuse. Seems to fly fine there. I also moved the servos in the tail up to the cg and made a new servo tray. With a OS.91fs my weight came out to 7lbs 10oz. The retracts seem to work ok at that weight. Much more and I think the retracts wouldnt hold up. I had to readjust the retracts to get rid of the toe in. The toe in caused the struts to hop while rolling. Edwin

georgek54 -> RE: C.G. OF HANGAR-9 P40 WARHAWK (10/4/2009 1:24 PM)
Thanks a lot Edwin We adjusted the C.G. according your instructions and the model flew perfectly ! Thank you again ! George

tailskid -> RE: C.G. OF HANGAR-9 P40 WARHAWK (10/4/2009 9:52 PM)
Just like the doctor ordered and it flys great!

Edwin -> RE: C.G. OF HANGAR-9 P40 WARHAWK (10/5/2009 1:52 AM)
Thats a pretty pristine looking H9 P-40 there. Mine looks battle hardened, beat up, and ready for pasture. Been flying it for about 4 years now. I'll probably strip it down this winter for a quick recovering. I just finished doing a lot of cowl repair patching the old muffler hole and fixing all the little cracks. Used a fair amount of bondo and have primer grey on it for now. I used a 90deg exhaust elbo along with the standard exhaust manifold then put a dubro muffler extender on it to route it out the bottom of the cowl. Wish I had thought of that in the beginning. Edwin

Page: [1]

SITE MAP! : : FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

0.1074219