ZDZ & Pica 1/5 Scale P51D (Full Version)

All Forums >> [RC Airplanes] >> RC Warbirds and Warplanes



Message

KevinKRC -> ZDZ & Pica 1/5 Scale P51D (7/14/2003 10:01:10 PM)

I am looking for insight into the selection of a ZDZ engine for the PICA 1/5 scale Mustang P51D Kit.

I have been reading and it seems the 40cc would be a marginal choice, the 50cc sounds good but is new and a pitts muffler is not listed on the RCshowcase website.

I have had discssions with people who own ZDZ 60's and recommend them highly. But I am not sure if the 60 is too big.

I have read about guys recommending the Zenoah G-62 but the cowl gets cutup. The ZDZ 40RV-L has the same HP and is lighter so I thought either the 40 or the 50 would work well.

Others thoughts would be appreciated.

KevinKRC :confused:



vik -> ZDZ & Pica 1/5 Scale P51D (7/15/2003 11:55:25 AM)

zdz 40 have enough power to pull this plane.
Friend used it in big top flite mustang and it flies like a rocket



Jeff396 -> ZDZ & Pica 1/5 Scale P51D (7/15/2003 4:41:27 PM)

The ZDZ 50 was one of the possible engines for my Hanger 9 80" Cap 232. RC Showcase does offer a Bisson Custom Muffler in the Inverted Pitt's style. Here's a link to their page to order it.

http://shopping.netledger.com/app/site/site.nl/site.ACCT22997/mode.items/sc.2/category.2007/.f

If you go to accessories and select "In Cowl Mufflers" there is a table that shows all of the mufflers they offer. It's just that they have no picture for the inverted Pitt's to fit the ZDZ 50 yet. Here's a link to that page.

http://www.rcshowcase.com/html/accessories/mufflers.html

Hope this helps!!

Jeff



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
7.910156E-02