flywheel and collet (Full Version)

All Forums >> [RC Boats] >> Speed - RC Nitro Boats



Message

71dartswinger -> flywheel and collet (5/1/2010 2:52 AM)

does any one have a flywheel and collet for a  OS .20
shaft is 1/4 28 and prop shaft is 1/8"
( for a vintage wood deep vee boat i bought off ebay) 



RS 38-40 -> RE: flywheel and collet (5/1/2010 5:44 PM)

Tower has them BUT It don't say what the threads are . It just tells the cable size .



71dartswinger -> RE: flywheel and collet (5/4/2010 4:03 AM)

picked up three flywheels off of ebay if they do not have correct thread i will drill and tap out
now to find a collet 1/4 28 by 1/8" or 3mm 



71dartswinger -> RE: flywheel and collet (5/5/2010 3:52 AM)

here are some pictures 



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

RC Universe is a service of Internet Brands, Inc. Copyright © 2001-2013.
0.0625