PTE 36R version 3 Gasoline RC model aircraft engine 4 h.p "rear exhaust"
05-23-2018, 01:51 PM
#1
Thread Starter
My Feedback: (850)
Join Date: Oct 2008
Location: Maplewood,
MO
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
PTE 36R version 3 Gasoline RC model aircraft engine 4 h.p "rear exhaust"
<iframe width="640" height="360" src="https://www.youtube.com/embed/sbbuKUCAhbU" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen></iframe>
Older video we did back on July 26, 2011
Ibcinyourc is the first distributor to import PTE products, we would appreciate your patronage! Call text or email for more info: 314-256-9987 or [email protected]
We are proud to offer the PTE 36R V3 - the top of the line engine in this class. Dealership warranty support right here in the USA.
1) Pitts rear exhaust muffler included with the PTE 36R
2) High Power Design - the PTE spins a 20x8 with ease
3) The PTE 36 has Japanese Bearings for Long Life
4) The ignition can handle up to 7.2V on the PTE
5) The idle and transitions are BUTTERY Smooth
6) The PTE 36 has the same bolt pattern and prop bolt pattern as the DLE 30
7) The PTE has almost the same dimensions as the DLE 30
8) The PTE is only 2 ounces more than the DLE 30, but has SIGNIFICANT power increase
8)Every PTE is tested at the factory before boxing! (only started and quick run to assure quality control)
PTE-36
PTE 36 Mounting Template
PTE 36 Manual
Specifications:
Displacement: 36 cc
Bore X Stroke 38*32
Weight: 2.8 lb
RPM Range: 1,400-9,000
HP Apprx. 4 h.p.
Recommended Oil:
Break in: 1 Gallon with Lawnboy at 32:1
Then: Redline or other quality synthetic at 50:1
Includes:ignition, muffler, spark plug, gasket, bolts, machined aluminum standoffs, Carbon Fiber throttle arm extension, mounting template, and prop template
Suggested Propellers: 18x8, 19x8 20x6,8,10
Suggested Break-in Prop: 19x8
Ignition Battery: 4.8-6.0V NiCd or NiMH, 6.6V LiFe
Compression Ratio: 7.6:1
Recommended Propeller: Falcon 19x8 - type 18x8, 19x8 Propeller
RPM Range: 1,400-9,000
Older video we did back on July 26, 2011
Ibcinyourc is the first distributor to import PTE products, we would appreciate your patronage! Call text or email for more info: 314-256-9987 or [email protected]
We are proud to offer the PTE 36R V3 - the top of the line engine in this class. Dealership warranty support right here in the USA.
1) Pitts rear exhaust muffler included with the PTE 36R
2) High Power Design - the PTE spins a 20x8 with ease
3) The PTE 36 has Japanese Bearings for Long Life
4) The ignition can handle up to 7.2V on the PTE
5) The idle and transitions are BUTTERY Smooth
6) The PTE 36 has the same bolt pattern and prop bolt pattern as the DLE 30
7) The PTE has almost the same dimensions as the DLE 30
8) The PTE is only 2 ounces more than the DLE 30, but has SIGNIFICANT power increase
8)Every PTE is tested at the factory before boxing! (only started and quick run to assure quality control)
PTE-36
PTE 36 Mounting Template
PTE 36 Manual
Specifications:
Displacement: 36 cc
Bore X Stroke 38*32
Weight: 2.8 lb
RPM Range: 1,400-9,000
HP Apprx. 4 h.p.
Recommended Oil:
Break in: 1 Gallon with Lawnboy at 32:1
Then: Redline or other quality synthetic at 50:1
Includes:ignition, muffler, spark plug, gasket, bolts, machined aluminum standoffs, Carbon Fiber throttle arm extension, mounting template, and prop template
Suggested Propellers: 18x8, 19x8 20x6,8,10
Suggested Break-in Prop: 19x8
Ignition Battery: 4.8-6.0V NiCd or NiMH, 6.6V LiFe
Compression Ratio: 7.6:1
Recommended Propeller: Falcon 19x8 - type 18x8, 19x8 Propeller
RPM Range: 1,400-9,000
