CARF Extra 330L 2.6M ARF

Airplanes - Aerobatic & 3D

08-12-2018, 04:59 PM | Replies: 1 | Views: 76
Location: Meridian, ID, United States
Join Date: Sep 2005
My Feedback: (47)
JRSmith is offline  

  • Price
    • OBO
  • Condition New

Up for sale is a CARF Extra 330L 2.6M ARF. I got this in a lot sale and planned on selling it once I got a canopy frame and clear canopy for it. I ordered the new canopy from Andy at CARF. However, there are no 330L canopies left, but the 300SX canopy is a perfect fit. He had only one canopy frame left and it was red, but this will need to be painted anyway, so no big deal. If you wanted to fly it in the white and blue, you could paint the canopy frame white to match.

This was the predecessor to the Extra 300SX and has the blade spar system. The airplane is overall excellent condition with a few minor hangar rash marks. The two spots that I noticed during inspection are the two small dings on the left side of the turtle deck and another ding that partially broke through the outer layer on the bottom of the wing by the servo opening. Neither of these dents broke through the inside and they are just cosmetic. Since the airplane has to be painted, a little filler would take care of each spot quickly! If you don't want to paint it, neither will affect structural integrity or performance.

The only other thing to note is there is some chipping on the vertical stab, this will not affect performance either and when it comes to paint, I would back the areas with some lightweight fiberglass and use some filler, again an easy job! I took pictures of all areas noted, these are very minor and easily fixed.

Includes all the items pictured. The only thing that has been done was, the servo mounts where glued onto the covers. I am not sure if all the wood components are there, but these are easily fabricated. There were no hardware packs with the model, but most will prefer to use their own hardware anyway. The new canopy frame already has the tabs installed from the factory so that will not need to be done. Overall a like new model and considering the age of the model in excellent shape!

I would prefer not to ship, unless buyer arranges all crating and shipping and assumes all risk and liability. I am willing to meet a half a day drive away from Meridian, ID (83642). Approximately 350-400 miles and about 10 hour round trip is about as far as I am willing to go.

If somebody could not meet and even though I would prefer not to ship. There is a local company here in Meridian that can build the crate and ship it in case you would like to do that. I did check on another airplane to go to Ohio, shipping class 300 and it was about $300-$350 to ship. Crate was extra and price was dependent of size of crate needed. Greyhound Package Express would be another option, but I would have to build the crate for that. I will consider that it the buyer covers the cost build the crate and shipping.

Please look at all the pictures, this shows actual condition of the airplane and components. $900 OBRO and I am motivated to sell. I am always open to offers, but kindly ask to be reasonable. This is basically a new airplane, even though it is older, it is still like new! If you have any question, please feel free to reach out and PM me and I will get back to you quickly. Thanks for looking

Reply With Quote
Old Today, 06:03 AM
Thread Starter
My Feedback: (47)
JRSmith's Avatar
Join Date: Sep 2005
Location: Meridian, ID
Posts: 292
My Gallery
My Models
My Feedback

I will consider all reasonable offers!
JRSmith is offline  
Reply With Quote

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service