xkdetect x380 Quadcopter w FPV, OSD, Gimbal RTF
#1
Thread Starter
Join Date: Mar 2007
Location: Pittsburgh,
PA
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
xkdetect x380 Quadcopter w FPV, OSD, Gimbal RTF
Up for sale is my fully customized x380/v303 hybrid 350 quad copter. I've had it a little over a year, only about 20 flights or so, never any crashes. I'm no longer using it so its up for sale. Price is firm, there is around $400 in materials here in the quad and accessories.
To do FPV you will just need a 5.8 goggle set.
To add HD camera ability, just add a camera and put it on the gimbal.
This was originally a v303 but after buying extended legs and the lower shell of the x380 it became a hybrid (has the same internal components as well).
Here is the list of mods/changes/whats included:
-GPS shielding mod (under the canopy)
-Micro Minim OSDA
-Immersion RC 600 mw 5.8 Ghz Video transmitter
-XK Detect 2D brushless motorized Gimbal
-FPV camera hookup connector (fpv camera and HD camera not included)
-5400 Mah 3S battery packs (9-15min flights depending on load/cameras)
-Video Transmitter Antenna (airscrew)
-DJI 9450 props two sets
Shipping cost is buyer paid depends on location
Sample video here
I have the full outline in my mods build here:
http://flight-stew.com/2016/06/01/xk...aranis_x9D_Mod
*I put back in the stock receiver so no need for a taranis radio (in the web page i had done some taranis mods)**
To do FPV you will just need a 5.8 goggle set.
To add HD camera ability, just add a camera and put it on the gimbal.
This was originally a v303 but after buying extended legs and the lower shell of the x380 it became a hybrid (has the same internal components as well).
Here is the list of mods/changes/whats included:
-GPS shielding mod (under the canopy)
-Micro Minim OSDA
-Immersion RC 600 mw 5.8 Ghz Video transmitter
-XK Detect 2D brushless motorized Gimbal
-FPV camera hookup connector (fpv camera and HD camera not included)
-5400 Mah 3S battery packs (9-15min flights depending on load/cameras)
-Video Transmitter Antenna (airscrew)
-DJI 9450 props two sets
Shipping cost is buyer paid depends on location
Sample video here
I have the full outline in my mods build here:
http://flight-stew.com/2016/06/01/xk...aranis_x9D_Mod
*I put back in the stock receiver so no need for a taranis radio (in the web page i had done some taranis mods)**