Skymaster Hawk 100 RTF
10-16-2018, 11:46 AM
#1
Thread Starter
Join Date: Jul 2012
Location: West Palm Beach,
FL
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Skymaster Hawk 100 RTF
Skymaster 1:4.75 Hawk 100
ATJ 160SV, 150 minutes Total Time
JR 8911HV all around
JR398HV servos operating Robart air valves for gear and door, UP valve on brake
12120 Powersafe RX, TM1000, GPS sensor, all batteries included
DX18/20 programming available
JR 370A gyros
Unilight LED's & controller
Wingbags
Wingtip missiles
Things you need to know:
-I am the third owner, previous owners and plane history are known to me.
-No repair, damage, or replacement history on this model, but it's been flown and enjoyed so it shows typical for use.
-Speedbrake option in the tail is not installed, but its cut and prepped for it.
-There is a small chip missing from the canopy hoop, currently, a piece of electrical tape hides this.
-Typical paint cracks on the aft belly from the light layup flexing when resting on a fender stand for assembly. best to spread the weight over a larger area.
-I bought it and thought I'll yank out those 'old' gyros for a cortex, but they are dialed in and the plane feels great with them really just as good as any of my other planes with a cortex.
Model is in S. Florida 33401. I can crate and ship worldwide at buyers expense.
Not interested in trades.
$6,750 BNF
Final Note- I have no clue with the revised RCU classifieds where my Trader feedback has gone, I'm not new to this and have bought and sold several jets on RCU
ATJ 160SV, 150 minutes Total Time
JR 8911HV all around
JR398HV servos operating Robart air valves for gear and door, UP valve on brake
12120 Powersafe RX, TM1000, GPS sensor, all batteries included
DX18/20 programming available
JR 370A gyros
Unilight LED's & controller
Wingbags
Wingtip missiles
Things you need to know:
-I am the third owner, previous owners and plane history are known to me.
-No repair, damage, or replacement history on this model, but it's been flown and enjoyed so it shows typical for use.
-Speedbrake option in the tail is not installed, but its cut and prepped for it.
-There is a small chip missing from the canopy hoop, currently, a piece of electrical tape hides this.
-Typical paint cracks on the aft belly from the light layup flexing when resting on a fender stand for assembly. best to spread the weight over a larger area.
-I bought it and thought I'll yank out those 'old' gyros for a cortex, but they are dialed in and the plane feels great with them really just as good as any of my other planes with a cortex.
Model is in S. Florida 33401. I can crate and ship worldwide at buyers expense.
Not interested in trades.
$6,750 BNF
Final Note- I have no clue with the revised RCU classifieds where my Trader feedback has gone, I'm not new to this and have bought and sold several jets on RCU
10-30-2018, 06:03 AM
#3
Thread Starter
Join Date: Jul 2012
Location: West Palm Beach,
FL
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
2480mm long x 2000mm wingspan
LOL, would you like paint codes also?
Not that your point is invalid...BUT Who is going to buy this without first going to the Skymaster website to look at the model info anyhow...at minimum to verify the numbers given in anyone's listing? Also, iff you can 'see' its 1:4 scale from those photos (even though it is 1:4.75) then good on you
LOL, would you like paint codes also?
Not that your point is invalid...BUT Who is going to buy this without first going to the Skymaster website to look at the model info anyhow...at minimum to verify the numbers given in anyone's listing? Also, iff you can 'see' its 1:4 scale from those photos (even though it is 1:4.75) then good on you
Last edited by kohersh; 10-30-2018 at 10:44 AM.
