BVM F16 1/6 General Dynamics.
#1
Thread Starter
My Feedback: (2)
Join Date: Feb 2013
Location: Newburgh, IN
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
BVM F16 1/6 General Dynamics.
F16 1/6 BVM. General Dynamics
Great condition
Savox 1270's on all except elevators
Savox 2290's elevators
kevlar tanks x4
8mm fittings all
high flow fuel system including UAT
Afterburner LED ring effect
BVM 1/6 Pilot figure
smoke pump and tube unused
Monster ball links and titanium rods on all surfaces
Turbine/receiver ready
$5000 , offers may be considered
local pick up or with in a couple hours.
Great condition
Savox 1270's on all except elevators
Savox 2290's elevators
kevlar tanks x4
8mm fittings all
high flow fuel system including UAT
Afterburner LED ring effect
BVM 1/6 Pilot figure
smoke pump and tube unused
Monster ball links and titanium rods on all surfaces
Turbine/receiver ready
$5000 , offers may be considered
local pick up or with in a couple hours.
Last edited by 420flier; 08-25-2018 at 10:02 AM.
#2
Bvm f-16
F16 1/6 BVM. General Dynamics
Great condition
Savox 1270's on all except elevators
Savox 2290's elevators
kevlar tanks x4
8mm fittings all
high flow fuel system including UAT
Afterburner LED ring effect
BVM 1/6 Pilot figure
smoke pump and tube unused
Monster ball links and titanium rods on all surfaces
Turbine/receiver ready
$5000 , offers may be considered
local pick up or with in a couple hours.
Great condition
Savox 1270's on all except elevators
Savox 2290's elevators
kevlar tanks x4
8mm fittings all
high flow fuel system including UAT
Afterburner LED ring effect
BVM 1/6 Pilot figure
smoke pump and tube unused
Monster ball links and titanium rods on all surfaces
Turbine/receiver ready
$5000 , offers may be considered
local pick up or with in a couple hours.
How much time on Airframe and what blemishes are on it ?
Thanks
Doug
#3
Thread Starter
My Feedback: (2)
Join Date: Feb 2013
Location: Newburgh, IN
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
I have been flying it for just over a year now.
The only blemishes are on the bottom of the ventral fins. They are low to the ground as I am sure your aware. We have some stone areas at our field and I rubbed the fins while turning the F16. Other than that it is really pristine. I will add a couple photos to the add so you can check them out. Very minor and hard to see unless you get really close. The airframe was siting for a year before that in a garage as well. The guy never assembled it. So it was basically new. You could say it is two years old though.
The only blemishes are on the bottom of the ventral fins. They are low to the ground as I am sure your aware. We have some stone areas at our field and I rubbed the fins while turning the F16. Other than that it is really pristine. I will add a couple photos to the add so you can check them out. Very minor and hard to see unless you get really close. The airframe was siting for a year before that in a garage as well. The guy never assembled it. So it was basically new. You could say it is two years old though.
Last edited by 420flier; 08-25-2018 at 10:05 AM.