NICE PST F9F-Panther EDF 12S, NEW, RTF!!
01-01-2019, 03:28 PM
#1
Thread Starter
My Feedback: (10)
Join Date: Oct 2003
Location: Webster,
NY
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
NICE PST F9F-Panther EDF 12S, NEW, RTF!!
This is the second PST Panther I have built. The first one flew extremely well and well behaved with the identical setup. Plenty of power on 12S setup. The listed Panther was built 3 years ago but never flown.
Specifications:
Scale: 1:6.3
Wingspan: 185cm
Length:185cm
CG 9.53cm / 3.75 in from leading edge.
Empty weight 21.7 lb/ 10kg
EDF: Custom XPS Dynamax Pro. 8 Pole motor, 12S, 127mm diameter fan. Intakes have been reinforced w/ CF stringers.
ESC: Jeti Spin 200A
Rx: Spectrum AR 9210 Powersafe Evolution.
Gear: Down and Locked electric retracts, pneumatic brakes (not needed when flying off grass).
Servos: Ele Hitec 7955 TG, Ail Hitec 7775MG, Flaps Hitec 645MG, Rud Hitec 5625MG, Nose Hitec 5625MG.
Nomenclature: painted (stencils from Terry Holston).
Full cockpit w/ Ted Williams GI Joe pilot.
All you need are 2x 6S Lipos (I used 2x6800mAh, approx 5.4 lb) and 2x 2S Rx batteries.
I have manuals and can give you the throws which I used on my first one.
Welcome to inspect prior to purchase. Sold as is. No returns. No trades.
Crating and shipping costs responsibility of buyer or Pickup obviously,
Payment: any way you wish. Paypal add 4%.
For Sale in near future:
-JetLegend T-45
-FeiBao F9-F
-JetLegend L-39 Albatros
-BVM F-80
-BVM all metal KingCat
-Turbine Habu32X
Specifications:
Scale: 1:6.3
Wingspan: 185cm
Length:185cm
CG 9.53cm / 3.75 in from leading edge.
Empty weight 21.7 lb/ 10kg
EDF: Custom XPS Dynamax Pro. 8 Pole motor, 12S, 127mm diameter fan. Intakes have been reinforced w/ CF stringers.
ESC: Jeti Spin 200A
Rx: Spectrum AR 9210 Powersafe Evolution.
Gear: Down and Locked electric retracts, pneumatic brakes (not needed when flying off grass).
Servos: Ele Hitec 7955 TG, Ail Hitec 7775MG, Flaps Hitec 645MG, Rud Hitec 5625MG, Nose Hitec 5625MG.
Nomenclature: painted (stencils from Terry Holston).
Full cockpit w/ Ted Williams GI Joe pilot.
All you need are 2x 6S Lipos (I used 2x6800mAh, approx 5.4 lb) and 2x 2S Rx batteries.
I have manuals and can give you the throws which I used on my first one.
Welcome to inspect prior to purchase. Sold as is. No returns. No trades.
Crating and shipping costs responsibility of buyer or Pickup obviously,
Payment: any way you wish. Paypal add 4%.
For Sale in near future:
-JetLegend T-45
-FeiBao F9-F
-JetLegend L-39 Albatros
-BVM F-80
-BVM all metal KingCat
-Turbine Habu32X
Last edited by Downwind3Zero; 01-02-2019 at 08:05 AM.
01-02-2019, 12:17 AM
#2
hi, your links don't work?
I have a nice Foremost 150 with an EDF Turbax 15 pounds of thrust has all metal digital servos. just needs tidied up the wires. its a 12s Turbax EDF unit. I can send you pictures.
thank you,
Gary
I have a nice Foremost 150 with an EDF Turbax 15 pounds of thrust has all metal digital servos. just needs tidied up the wires. its a 12s Turbax EDF unit. I can send you pictures.
thank you,
Gary
01-02-2019, 03:23 PM
#10
Join Date: May 2014
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
more info on the t45 welcome to my pm or email [email protected]
it appears to be an older p70 propane start...
it appears to be an older p70 propane start...
01-06-2019, 07:09 PM
#21
Thread Starter
My Feedback: (10)
Join Date: Oct 2003
Location: Webster,
NY
Posts: 227
Likes: 0
Received 0 Likes
on
0 Posts
more info on the t45 welcome to my pm or email [email protected]
it appears to be an older p70 propane start...
it appears to be an older p70 propane start...