Hanger 9 Carbon Cub Ready to Fly New Never Flown
#1
Thread Starter
Hanger 9 Carbon Cub Ready to Fly New Never Flown _ ITEM SOLD!
Sale price $ 572, READY TO FLY, transmitter ready.
Brand new, built and never flown. Need the money for another (bigger) project.
Has a Futaba R617FS7 receiver. If you do not need a receiver, w/o receiver (or receiver ready) $ 522.00
I built it for me, so all the best and new was used (see list below). Not shown in pictures, but of course comes with seats and everything that was included. A real beauty. You will need a 6-cell battery 3500 to 5000 range, and your transmitter. All you still will have to do is check the CG (depending of the battery size used). Lot of room to move the battery to the front or back as needed to nail the CG. It has functional lights. I did not connect them, but it is wired, and they work (I checked).
Hanger 9 Carbon Cub 90 inch WS 1170 sq in Kit $ 359.99
Talon 90A Controller $ 82.99
E-flite 60 $ 109.99
Futaba S3004 Standard Ball Bearing Servo 13.99 x 4 $ 55.96
TS-53 servos (flaps) 2 x 10 = $ 20
Futaba R617FS 7-Channel FASST Receiver $49.99
1 x 12" extension $ 4.49
2 x 9" extensions $ 5.99 = 11.98
4 x 24" extensions: $4.99 = 19.96
Total invested $ 715.35
Pickup only in Levittown PA
Brand new, built and never flown. Need the money for another (bigger) project.
Has a Futaba R617FS7 receiver. If you do not need a receiver, w/o receiver (or receiver ready) $ 522.00
I built it for me, so all the best and new was used (see list below). Not shown in pictures, but of course comes with seats and everything that was included. A real beauty. You will need a 6-cell battery 3500 to 5000 range, and your transmitter. All you still will have to do is check the CG (depending of the battery size used). Lot of room to move the battery to the front or back as needed to nail the CG. It has functional lights. I did not connect them, but it is wired, and they work (I checked).
Hanger 9 Carbon Cub 90 inch WS 1170 sq in Kit $ 359.99
Talon 90A Controller $ 82.99
E-flite 60 $ 109.99
Futaba S3004 Standard Ball Bearing Servo 13.99 x 4 $ 55.96
TS-53 servos (flaps) 2 x 10 = $ 20
Futaba R617FS 7-Channel FASST Receiver $49.99
1 x 12" extension $ 4.49
2 x 9" extensions $ 5.99 = 11.98
4 x 24" extensions: $4.99 = 19.96
Total invested $ 715.35
Pickup only in Levittown PA
Last edited by GerKonig; 03-23-2019 at 11:03 AM.