Had several guys wanting the last Mig-21 kit I made so here is another Mig-21MF kit I made from my molds. Made Mig from the Tim Farrel plans so planes have been built and flown from the plans. 65"long . 35" wingspan. Plans show a K&B 7.5 engine and a Kress RK-740 fan. Used West Systems epoxy on the fuse. Light weight and real strong. Foam wing and stab cores. Fiberglass inlet strake. Canopy that has the frames molded in. Set of plans. Don't know if I will make another one as these kits are a pain and time consuming to make. Box dimensions will be 12 x 12 x 65" long and weight about 10lbs. My zip is 76014 so you guys can get a ball park figure on shipping. $500.00 plus the shipping. Partial 120mm fan combo trades considered.