47% DR109 plus too much to list - Out of Hobby
#1
Thread Starter
My Feedback: (9)
Join Date: Jul 2003
Location: Melbourne, Florida
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
47% DR109 plus too much to list - Out of Hobby
Hello folks .... been out of the hobby for quite some time and have a ton of gear. Some folks might remember me (Perry) and my brother Dave Genovese with our huge DR109's. We did it in 35% and then 47%.
Basically all my gear has been siting here and if there were an interest I'd make a sweet deal for the entire package for anyone that could come pick it all up in Melbourne, Florida.
Highlights:
47% DR109 by GB Aircraft - 99% complete. Needs wing alignment and stab pins and canopy work plus some covering trim....done in yellow base with checks on bottom of panels
ZDZ210 with headers and canisters, ignition, etc.
Several props for the ZDZ
Hitec Servos installed....4 per aileron, 2 per elevator, 1 for throttle and 1 for choke, plus a Seiko on the rudder.
JR 10X, receivers, etc
I realize the electronics are dated but still solid.
Right now I figured I would just get a feel for any interest as taking it down and assembling it for pics is a ton of work as well as a complete inventory,
Have a bunch of other stuff as well.....such vintage kits, even a NIB TREX helicopter complete with NIB gear.
Here's a link to a video of his last airframe before also retiring from the hobby.
Attached photo of his last project as well. Again mine is up on the shelf at the moment and just trying to see if there is a serious interest.
If in the region and interested feel free to contact me
Email is [email protected]
Basically all my gear has been siting here and if there were an interest I'd make a sweet deal for the entire package for anyone that could come pick it all up in Melbourne, Florida.
Highlights:
47% DR109 by GB Aircraft - 99% complete. Needs wing alignment and stab pins and canopy work plus some covering trim....done in yellow base with checks on bottom of panels
ZDZ210 with headers and canisters, ignition, etc.
Several props for the ZDZ
Hitec Servos installed....4 per aileron, 2 per elevator, 1 for throttle and 1 for choke, plus a Seiko on the rudder.
JR 10X, receivers, etc
I realize the electronics are dated but still solid.
Right now I figured I would just get a feel for any interest as taking it down and assembling it for pics is a ton of work as well as a complete inventory,
Have a bunch of other stuff as well.....such vintage kits, even a NIB TREX helicopter complete with NIB gear.
Here's a link to a video of his last airframe before also retiring from the hobby.
Attached photo of his last project as well. Again mine is up on the shelf at the moment and just trying to see if there is a serious interest.
If in the region and interested feel free to contact me
Email is [email protected]