5000mah 11.1v lipo doesn't work out of the box :(
#1
Thread Starter
Join Date: Aug 2007
Location: Clearwater, FL
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
5000mah 11.1v lipo doesn't work out of the box :(
So I got my 11.1v 5000mah lipo from maxamps today and was very excited to see it arrive. Upon charging it my triton rejected it several times saying "battery voltage too low". A few more tries to get it to charge and finally it took to it. The voltage of the pack reported to be 8.83 volts [:'(]. I think possibly one of the cells is dead. How do I check each cells voltage through the hyperion taps?
#2
Thread Starter
Join Date: Aug 2007
Location: Clearwater, FL
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
RE: 5000mah 11.1v lipo doesn't work out of the box :(
I'm going to try running a couple more cycles through it and see if it stabilizes. For some reason the triton is only *****g out at 1.9 amps when it's set to 2.5?
#3
Senior Member
Join Date: Jan 2007
Location: Nine Mile Falls,
WA
Posts: 556
Likes: 0
Received 0 Likes
on
0 Posts
RE: 5000mah 11.1v lipo doesn't work out of the box :(
Stop what your doing and send the pack back. Give me your full name and order number. We'll get a new one out to you ASAP. E-mail the info to [email protected] . Better to be safe.
Jason
MaxAmps
Jason
MaxAmps
#5
Senior Member
Join Date: Jan 2007
Location: Nine Mile Falls,
WA
Posts: 556
Likes: 0
Received 0 Likes
on
0 Posts
RE: 5000mah 11.1v lipo doesn't work out of the box :(
I talked with Clint, Gave him the order ID # and he will contact you. He'll have you send it back for replacement.
If you have any further questions just let me know.
And thank you..
Jason
MaxAmps
If you have any further questions just let me know.
And thank you..
Jason
MaxAmps