Hyperion EOS0610i Duo
#1
Junior Member
Thread Starter
Join Date: Jan 2008
Location: Pleasanton,
CA
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Hyperion EOS0610i Duo
I just picked up the Hyperion EOS0610i Duo, but just noticed it doesnt have an AC plug. What is the best way to rig this up to a AC wall outlet?? I was looking at one of these, but not sure if it will work.
http://www.grandrc.com/inc/sdetail/79685
Any advice or suggestions would be appreciated.
http://www.grandrc.com/inc/sdetail/79685
Any advice or suggestions would be appreciated.
#2
Senior Member
Join Date: Jan 2007
Location: Nine Mile Falls,
WA
Posts: 556
Likes: 0
Received 0 Likes
on
0 Posts
RE: Hyperion EOS0610i Duo
Your gonna want a power supply that will do 11 to 15 volts and around 360 watts or more to get the best performance out of it.
Jason
Jason
#3
Senior Member
Join Date: Jun 2003
Location: Mission,
BC, CANADA
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
RE: Hyperion EOS0610i Duo
I have a Pro Peak 20 Amp Single Output Power Supply and are very happy with it. It is only $59 but does have the extra output jacks which would be nice to have and does not have a current display. I been thinking of adding a second set of output jacks to mine.
#4
Junior Member
Thread Starter
Join Date: Jan 2008
Location: Pleasanton,
CA
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
RE: Hyperion EOS0610i Duo
ORIGINAL: JAM MaxAmps
Your gonna want a power supply that will do 11 to 15 volts and around 360 watts or more to get the best performance out of it.
Jason
Your gonna want a power supply that will do 11 to 15 volts and around 360 watts or more to get the best performance out of it.
Jason
That other one I linked before maxes out at like 8A, and I probably need one that can do at least 10A. So I found this one... You think this should work??
DF 1763 AC TO DC CONVERTER
This unit converts from AC to 13.8V DC Power. Ideal for household transceiver, automobile/mobile equipment, and portable equipment.
Input Voltage: 110V AC or 220V AC
10% Load Regulation
Output Current: 10A
Applies Current Limit Short Circuit protection for DC output.
5% Voltage Regulation
Current Limit Protector for AC Input
One Hour Continuous Working Time
http://www.voltage-converter-transfo...converter.html