If this is your first visit, please click the Sign Up now button to begin the process of creating your account so you can begin posting on our forums! The Sign Up
process will only take up about a minute of two of your time.
Mount it to the best fit, leave about 1/4" space for the back of the carb, then move the cowl forward. That would be the safest move, if you have to...
Mine had no roll tendencies with flaps down. Did you measure them at the root when they are down to make sure the drop equally? What I did notice is...
I have enough scraps from kits that I dont need to go out and get any material to repair the P-51. I also tend to buy lots of things at swap meets as...
Yep, compared to the kit built planes that I had/have an identical ARF to, the build and materials are quite different. The P-51 ARF that I have it a...
Futaba radios used to come with a 3 servo tray that held the servos down exactly as described. I still have one or two laying around somewhere. This...
Well my Mustang will survive and fly again soon. :) Damage wasn't too bad to either the wing or fuse, and a few hours of work will have the structure...
There was zero yaw at just below half throttle, thats where the problem occurred, but the thing that brought it down was overreacting to the upcoming...
You should see the pilot my friend has for his Cub that he put into a gravel pit and then later through a tree. Same pilot from both, I swear it has...
Find latest posts