989 and Lipos
I am a little confused on charging lipos with my 989. I start the charge and it only charges for about 10 minutes then switches to trickle. Is this what it is supposed to do? Am I supposed to leave it on trickle until it stops or is it not charging correctly.
Thanks
Tom
I have this charger:
http://www.modelrec.com/search/product-view.asp?ID=6863 (SB989)
And plan on getting these Lipos.
https://www.hobbycity.com/hobbycity/...idProduct=8578 (5000mah 2S1P, 20C lipos)
I'd plan on charging them 2 at a time. What settings are recommended and what balancer is recomended?
Is there a good general lipo care and feeing mass of information somewhere that I can go soak my head in?
Thanks,
Hello, Glad to contact you, This is Wennie fm Ev-Peak Electronic Technology Co,.Ltd, we are OEM professional manufactory main in RC balance charger, Lithium Polymer bettery and accessory.
For your question we can offer your help. You can find our Rc balance charger from our website www.ev-peak.com.
I'd like to recommend our new model EV -622 as following:
Product description:
Specifications:
Input voltage:11-18V
Charge power:max. 200W
Discharge power: max. 25W
Charge current range:0.1-10.0A
Discharge current range:0.1-5.0A
Current drain for balancing LiPo:300mAh/cell
Trickle:50-200mA
Data store:max.10 data of batteries
NiCd/NiMH battery cell count:1-18 cells
LiPo/LiIo/LiFe battery cell count:1-6series
Pb battery voltage:2V-24V
Features:
1.microprocessor controlled
2.delta-peak sensitivity
3.individual cell balancing
4.LiIo,LiPo, LiFe,NiCd and NiMH capable
5.large range of charge current
6.store function
7.time limit function
8.input voltage monitoring
9.data storage(store up to10 packs in memory)
10.battery break in and cycling
11. Automatically trickle charging function
12.USB PC link
Best Regards
Wennie He
Sales Manager
Shenzhen Ev-Peak Electronic Technology Co,.Ltd
Tel:86 755 2917 7881
Mobile No: 86 150 1850 8672
Fax: 86 755 2917 7880
Email: [email protected]
Msn:: [email protected]
Skype: angelyoho
Website:www.ev-peak.com, www.evpeak.en.alibaba.com/
Wish it can interest of you.
Any other question please feel free to contact me. Thank you.
I don't mean to double post or hijack a thread but I realized after posting this on the general page that this was probably the better place to do so. I know I need a balancer or maybe two. I don't know how this works and need an education (another education)
I have this charger:
http://www.modelrec.com/search/product-view.asp?ID=6863 (SB989)
And plan on getting these Lipos.
https://www.hobbycity.com/hobbycity/...idProduct=8578 (5000mah 2S1P, 20C lipos)
I'd plan on charging them 2 at a time. What settings are recommended and what balancer is recomended?
Is there a good general lipo care and feeing mass of information somewhere that I can go soak my head in?
Thanks,
You can do them in parallel if they are the same cell count, and should be programmend into memory as a 2sx10000 mah pack. Set capacity to 10,000 , rate to 10 amps, ect. Any balancer should work as they are universal. Make sure to wire/adapt them corectly.
Trickle charging the LiPos would only be handy if you charge first and then balance once the battery is topped up. If you balance as you charge, you don't have to trickle charge.