voyager CG
04-04-2007, 01:29 PM
#2
Senior Member
Join Date: Jun 2006
Location: Whale Tail, RI
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
RE: voyager CG
I don't have the electric version of the Long-EZ that they call the "Voyager", but I do have the yellow version of the glow powered model. Here is a link to an online CG calculator that I used to verify the given CG of the one I have, which turned out to be within just a few millimeters of the same spot.
http://adamone.rchomepage.com/cg_canard.htm
I'd suggest you keep searching for the factory specification and verify it like I did with the calculator. Good Luck!
Rube
http://adamone.rchomepage.com/cg_canard.htm
I'd suggest you keep searching for the factory specification and verify it like I did with the calculator. Good Luck!
Rube
04-12-2007, 07:36 AM
#3
Member
Thread Starter
Join Date: May 2003
Location: petah tikva, ISRAEL
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
RE: voyager CG
Hi all
If CG is like apear in nitro web site I have to add 170 grames to the nose.I also install 3s 2500 lipo in the airplane nose
IS THIS IS NORMAL? did somebody have this problem?
Please advice
Moti
If CG is like apear in nitro web site I have to add 170 grames to the nose.I also install 3s 2500 lipo in the airplane nose
IS THIS IS NORMAL? did somebody have this problem?
Please advice
Moti
